SKF GEH 60 ES-2RS spherical plain bearing

SKF GEH 60 ES-2RS belongs to spherical plain bearing, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for GEH 60 ES-2RS and any equivalents.

For articulation points that must absorb misalignment while carrying combined radial and axial loads, SKF GEH ES-2RS rod ends are a practical choice. These detachable spherical plain bearings allow oscillating motion between connected parts, and their double seal keeps dust and moisture away from the sliding surfaces. MR Industrial Accessories supplies this line and helps you match the right bore and seal configuration to your equipment.

Reading the code helps you confirm what you are ordering. GEH identifies a metric radial rod end built around a spherical plain bearing. ES means the inner ring has a lubrication groove and holes and that the unit is detachable. The 2RS suffix signals an elastomer seal on both sides. In listings such as GEH 20 ES-2RS, GEH 25 ES-2RS or GEH 40 ES-2RS, the middle figure is the bore diameter in millimeters.

Typical installation points include hydraulic cylinder ends, steering linkages, suspension joints, packaging machinery, earthmoving attachments and rotating shaft mountings. Industries that rely on them range from metallurgy and food processing to agriculture and mining. Wherever a pivot must oscillate and tolerate some misalignment, this rod end type handles the combined loading without needing a separate housing.

Selection comes down to bore diameter, load direction and magnitude, oscillation speed and the surrounding environment. The 2RS seal is the right pick for dirty or damp conditions because it blocks contaminants and holds lubricant in place. During mounting, keep the components aligned and avoid hammering on the spherical plain bearing. Re-lubricating through the inner ring channels at regular intervals supports a longer service life, and if the joint runs with permanent misalignment, confirm the tilt angle stays within the permitted range.

SKF GEH ES-2RS rod ends can be swapped with alternatives from other manufacturers that use the same standardized designation. Compare bore diameter, width, outer diameter and seal type before substituting. ISO 12240-1 covers the dimensions of radial rod ends, which simplifies cross-referencing, but always confirm the replacement meets the load and speed demands of the machine.

To get a quote, send the complete part number through WhatsApp or email. MR Industrial Accessories serves customers throughout the United States and in several Latin American countries, and the team can suggest equivalents or help you settle on the correct size.