SKF GEH 30 ESX-2LS spherical plain bearing

SKF GEH 30 ESX-2LS belongs to spherical plain bearing, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for GEH 30 ESX-2LS and any equivalents.

Rod ends and spherical plain bearings in the SKF GEH ESX-2LS line handle articulation points where the shaft has to oscillate and where alignment between components is not perfect. They suit combined loading, which is why they show up on hydraulic cylinders, steering linkages and suspension work. MR Industrial Accessories supplies this series to maintenance and purchasing teams across the United States and Latin America.

Reading the code helps you confirm what you are ordering. GEH identifies a radial spherical plain bearing in that series, sized to the ISO standard. The digits give the bore in millimeters, so GEH 30 ESX-2LS carries a 30 mm bore. ESX points to a special inner ring design, normally with a groove and lubrication holes. The -2LS ending means double lip seals, one per side, to hold grease in and keep contaminants out. That seal arrangement is chosen where dust and moisture are present.

Typical installation points include hydraulic cylinder ends, steering arms on heavy vehicles, suspension systems, earthmoving equipment, presses, cranes and lifting gear. Metallurgy, automotive, agricultural and construction operations all use them. The reason is the same in each case: the joint has to absorb misalignment and take radial and axial loads at the same time.

When specifying, work from bore diameter, the load type you expect (radial, axial or combined) and the surrounding environment. The -2LS seals are a reasonable fit for moderate dust or moisture; where liquid or heavy dirt is present, plan on extra protection. Correct mounting depends on shaft alignment, and because these bearings have a groove and lubrication holes, periodic greasing is part of normal upkeep. Check radial clearance and the permissible tilting angle against the SKF catalog before you commit.

Because GEH rod ends use standardized dimensions, they can be swapped with other brands that follow the same standard and designation. Sealing and treatment are not always equivalent, though, and the -2LS suffix belongs to SKF. For a replacement, compare bore diameter, outside diameter, width and seal type first. Our team can help you match the right reference.

Send the code of the rod end you need by WhatsApp or email and we will prepare a quote. We can also review the application and mounting with you, suggest equivalents and help you choose. Ask about other rod end series or sizes if the one you have does not fit the job.