SKF GE 30 ESX-2LS spherical plain bearing
- Brand
- SKF
- Category
- Bearings
- Subcategory
- Spherical plain bearings and rod ends
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
SKF GE 30 ESX-2LS belongs to spherical plain bearing, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for GE 30 ESX-2LS and any equivalents.
For pivot points that must handle combined radial and axial forces under slow or oscillating motion, the SKF GE ESX-2LS series delivers. These radial spherical plain bearings feature treated steel sliding surfaces and double-lip seals on both sides. They suit agricultural equipment, road machinery and hydraulic linkages where misalignment and dirty conditions are common.
Reading the code helps with selection. GE stands for a radial spherical plain bearing. The number after GE is the bore diameter in millimeters, so GE 30 ESX-2LS has a 30 mm bore. ESX means the sliding surfaces are treated steel with a special treatment for wear and corrosion resistance. The 2LS suffix means double-lip sealing on each side, which keeps lubricant in and blocks dust and water.
Typical uses include seeders and harvesters, backhoes and shovels, and hydraulic cylinders and arms. Any articulation point that needs alignment and weather resistance is a candidate. In dusty or humid conditions, unsealed components tend to fail sooner. The 2LS seal adds a barrier against these contaminants.
When selecting, check the bore diameter, the rod end width and the required oscillation angle. The 2LS seal works well in dirty or wet environments, but confirm that operating temperature stays within the seal material limits. During assembly, align the shaft and housing correctly to avoid unwanted side loads. Proper initial lubrication matters; follow the manufacturer's guidance and relubricate based on the duty cycle. For continuous rotation, look at other options.
Interchangeability is possible with other brands that use the same standardized designation, such as GE..ES-2RS or GE..ESX-2RS series. Always confirm bore, outer diameter, width and seal type before substituting. MR Industrial Accessories supplies SKF and can advise on equivalents without compromising performance. Send the complete code if you are unsure.
To get a quote for SKF GE ESX-2LS rod ends and spherical bearings, message the exact part number via WhatsApp or email. The team responds promptly and can help confirm the application or suggest an equivalent.
Dimensions
Dimensions and tolerances: Message us the part number on WhatsApp and we'll verify its dimensions and version with the manufacturer's datasheet.
Frequently asked questions
- What does the 2LS suffix mean on an SKF rod end?
- 2LS indicates double-lip sealing on both sides. This helps retain lubricant and keeps out dust and water, which extends service life in harsh conditions.
- How do I choose the correct diameter for my application?
- The bore diameter appears in the designation: GE 30 ESX-2LS has a 30 mm bore. Measure the shaft or pin where it mounts and pick the rod end with that bore. Also check the width and oscillation angle.
- Can I replace an SKF rod end with another brand?
- Yes, if the main dimensions (bore, outer diameter, width) and seal type match. Standardized designations make interchange easier, but send the full code so we can confirm the correct equivalent.