SKF FYTBK 35 TF y-bearing unit
- Brand
- SKF
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
SKF FYTBK 35 TF belongs to y-bearing unit, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for FYTBK 35 TF and any equivalents.
The SKF FYTBK TF series combines a Y-bearing insert with a split cast iron housing. It mounts rotating shafts to fixed structures, allowing alignment and securing with two bolts. This unit suits light to medium-duty drives and is common in material handling, ventilation, and process equipment.
In the FYTBK code, the letters indicate a split Y-bearing housing with insert. The number that follows is the shaft diameter in millimeters, not the housing outside diameter. The TF suffix defines the seal and lubrication variant of the insert, built to keep grease in and contaminants out. For instance, FYTBK 30 TF fits a 30 mm shaft. Before ordering, confirm the actual shaft size and the mounting style your machine accepts.
These units appear in belt conveyors, bucket elevators, mixers, blowers, and packaging lines. They also serve water treatment, food plants, and industrial ventilation. The split housing simplifies installation and removal without dismantling the shaft, which helps where access is tight or when the insert must be changed quickly.
Selection depends on radial and axial loads, rotation speed, and site conditions. The TF seal handles dust and moderate humidity; for frequent washdowns or fine particles, consider additional protection. Mount the base on a flat, rigid surface—poor alignment speeds insert wear. Factory grease usually lasts the service life, but in demanding settings check and replenish periodically. Tighten mounting bolts to the specified torque to avoid housing distortion.
When replacing, interchangeability between brands is not automatic. Even with matching shaft diameter and hole spacing, overall height, seal type, or insert mounting may differ. Compare drawings or physical samples first. The SKF FYTBK TF series has equivalents in other brands, but part numbers are not universal. For a safe replacement, send the stamped part number or a photo with measurements.
MR Industrial Accessories LLC supplies the SKF line and can help you find the right Y-bearing. Send the complete part number—such as FYTBK 25 TF—or your shaft measurements and hole spacing via WhatsApp or email. With that information, we will quote a matching option and confirm compatibility with your mounting.
Dimensions
- Código universal
- UCFL 207
Frequently asked questions
- What does the number in an FYTBK housing mean?
- It indicates the shaft diameter in millimeters that the insert bearing accepts. FYTBK 30 TF, for example, fits a 30 mm shaft. It does not refer to housing size or hole spacing. Always verify the actual shaft diameter before ordering.
- How do I know if the TF seal is suitable for my application?
- The TF seal retains grease and slows the ingress of dust and moderate humidity. If your equipment sees frequent washdowns, chips, or very fine particles, extra protection may be needed. Share your environment details and we will guide you.
- Can I replace a housing from another brand with an SKF FYTBK TF?
- Not always directly. Even if shaft diameter and holes match, height, seal, or mounting system may differ. Compare drawings or send a photo with measurements so we can confirm whether the replacement is compatible.