SKF FYNT 75 F y-bearing unit
- Brand
- SKF
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
SKF FYNT 75 F belongs to y-bearing unit, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for FYNT 75 F and any equivalents.
The SKF FYNT is a ready-to-mount unit that pairs a cast iron housing with a Y-series insert bearing. It carries rotating shafts on transmission, conveying and process equipment, and it installs quickly with simple alignment. Lubrication and sealing come built in, so the unit suits areas with moderate dust or humidity.
Reading the code helps you order the right replacement. FYNT marks the SKF Y-bearing unit family with insert bearing and set screw locking. The digits give the shaft size in millimeters, and the trailing F identifies the unit variant. So FYNT 65 F fits a 65 mm shaft and FYNT 75 F fits a 75 mm shaft.
Typical duty covers belt conveyors, bucket elevators, mixers, mills, packaging lines and process equipment in food, cement, chemical and aggregate plants. These units handle radial loads and slight misalignment, which is why they also turn up on older or imported machines where interchangeability keeps production running.
Selection comes down to three checks: shaft diameter, load type (radial, axial or combined) and site conditions. The insert seal keeps out dust and splashes; where water or fine particles are present, extra protection is worth adding. For mounting, clean the shaft, confirm the tolerance, then tighten the set screws onto the inner ring. Proper lubrication and careful housing alignment both extend service life.
Y-bearing units from different brands often share standardized dimensions, but do not treat another part number as a direct replacement for the SKF FYNT without checking. Locking method, sealing and load capacity can vary between equivalent series. Compare drawings first, and ask a specialist before you substitute.
To replace an insert bearing unit, send the full part number by WhatsApp or email. With FYNT 65 F, FYNT 75 F or whatever appears on your machine, we quote the matching SKF unit. If you do not have the reference, we can help identify the variant, suggest equivalents and assist with the selection.
Dimensions
Dimensions and tolerances: Message us the part number on WhatsApp and we'll verify its dimensions and version with the manufacturer's datasheet.
Frequently asked questions
- What does FYNT mean on an SKF housing?
- FYNT identifies SKF Y-bearing units that combine a housing with an insert bearing and set screw locking. The number after it is the shaft diameter in millimeters, and the final letter shows the unit variant.
- How do I pick the correct Y-bearing unit for my shaft?
- Start with the measured shaft diameter, then look at the load type and the working environment. Check that the housing gives you the alignment you need and that the seal matches the dust or humidity on site. If anything is unclear, send us the machine part number.
- Can another brand's housing replace an SKF unit?
- Not automatically. Dimensions may line up, but the locking system, sealing or load capacity can differ. Compare the drawings and check with us before substituting to avoid early failures.