SKF FY 1.15/16 WF y-bearing unit
- Brand
- SKF
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
SKF FY 1.15/16 WF belongs to y-bearing unit, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for FY 1.15/16 WF and any equivalents.
The SKF FY WF Y-bearing housed unit arrives preassembled, pairing a cast iron housing with an insert bearing that locks via set screws. It supports rotating shafts in machinery where alignment is straightforward and lubrication lasts for the long term. This makes it a compact, sturdy choice for power transmission tasks.
Decode the part number like this: FY stands for the Y-bearing housed unit series, the following number gives the shaft diameter in either inches or millimeters, and WF signals a variant with particular sealing or locking characteristics. For instance, FY 1.15/16 WF fits a 1.15/16 inch shaft, whereas FY 25 WF, FY 30 WF, FY 35 WF, FY 40 WF, and FY 60 WF are metric sizes. Always double-check the full part number to confirm the size.
You will find these units in conveyors, belts, elevators, mixers, fans, and process equipment across food, chemical, cement, and material handling operations. Their cast iron housing handles moderate radial and axial loads, and the insert mounts directly onto the shaft without extra machining.
When selecting a unit, consider shaft diameter, load type, rotation speed, and environmental conditions. The insert seal keeps out dust and moisture; for humid areas or frequent washdowns, pick versions with an extra seal. Lubrication is applied at the factory, but check its condition and relubricate based on the duty cycle. Proper alignment between housing and shaft is essential to prevent stress and extend service life.
SKF FY WF housed units can replace other brands that share the same dimensional and locking standard. For a replacement, compare shaft diameter, mounting hole spacing, and insert locking method. We supply SKF and can help you find a suitable equivalent.
To get a quote, send the complete part number via WhatsApp. We will respond promptly and assist in confirming the right size and variant for your equipment.
Dimensions
- Código universal
- UCF 210-31
Frequently asked questions
- What does FY WF mean in an SKF housed unit?
- FY denotes the Y-bearing housed unit series, and WF indicates a variant with specific sealing or locking features. The number in between is the shaft diameter. Always verify the complete part number to ensure the size.
- How is a Y-bearing housed unit mounted?
- Fasten the housing to the structure with bolts, insert the shaft, and tighten the insert set screws. Align the housed unit with the shaft and follow the manufacturer's lubrication and torque recommendations.
- Are they interchangeable with other brands?
- Yes, if the main dimensions match: shaft diameter, distance between holes, and locking type. When replacing, compare these data. If you have doubts, consult us with the original part number and we will advise you.