SKF F2BC 106-TPSS y-bearing unit
- Brand
- SKF
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
SKF F2BC 106-TPSS belongs to y-bearing unit, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for F2BC 106-TPSS and any equivalents.
This SKF unit arrives already assembled: a housing and a ball insert bearing joined as one piece, ready to be fitted onto a rotating shaft. It supports and guides shafts in equipment where alignment is less than perfect and loads stay moderate. We supply this line and can help you match the right code to your application.
The code is built in blocks. Take F2BC 106-TPSS: the leading F tells you which housing type it is, the following number covers the series and shaft size, and TPSS points to the insert seal, which suits dusty or damp surroundings. Ordering the full designation is the safest way to get the exact replacement. If anything is unclear, send us the marking stamped on the part and we will check it.
You will find these units on belt conveyors, mixers, fans, centrifugal pumps and packaging lines, as well as in material handling systems and textile machinery. Food plants, meat processing operations, tanneries and agricultural sites rely on them because frequent washdowns demand seals that hold up to water. Pairing housing and insert bearing in a single assembly makes installation simpler and cuts downtime.
When choosing a housing, check three things: shaft diameter, the nature of the load (radial, axial or a mix of both) and the working environment. The TPSS seal keeps out dust and liquids, though fine abrasives may call for a different option. The shaft must be clean and free of burrs before mounting, and the insert set screws should be tightened with the correct wrench. Good alignment goes a long way toward bearing life.
Units in this category can be swapped between brands when the key dimensions line up: shaft diameter, distance between mounting holes and height to center. SKF is a global reference, and other manufacturers offer comparable parts. We supply SKF and can point you toward alternatives when your equipment permits. Verifying the full code before replacing anything is always worth the minute it takes.
To get a quote on the SKF Y-bearing housing with insert bearing you need, send the complete code over WhatsApp or by email. Our team answers quickly and can suggest equivalents or help you pick the right unit. If the code is not at hand, a photo of the part plus your shaft dimensions is usually enough for us to identify it.
Dimensions
Dimensions and tolerances: Message us the part number on WhatsApp and we'll verify its dimensions and version with the manufacturer's datasheet.
Frequently asked questions
- What does the TPSS suffix tell me about this housing?
- It identifies the seal type used on the insert bearing, built to keep out dust and splashes. The housing's main dimensions stay the same, but performance in contaminated settings changes. Confirm the full code before ordering a replacement.
- How can I tell whether this housing fits my shaft?
- Measure your shaft diameter and compare it with the number in the code that follows the initial letters. Then check the mounting hole spacing and the height to center. Send us those figures and we can confirm whether it matches.
- Can this SKF housing replace one from a different brand?
- It can, provided the main dimensions agree: shaft diameter, hole spacing and height to center. Interchangeability is common in this category, but checking the code and tolerances before mounting is recommended. Share your equipment details and we will review it with you.