SKF E2.6307-2Z/C3 deep groove ball bearing
- Brand
- SKF
- Category
- Bearings
- Subcategory
- Deep groove ball bearings
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
SKF E2.6307-2Z/C3 belongs to deep groove ball bearing, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for E2.6307-2Z/C3 and any equivalents.
Single-row deep groove ball bearings in the SKF E2 series use a steel cage and handle moderate radial and axial loads in either direction. Electric motors, pumps, fans and light transmission units are typical homes for this design, which is built for low maintenance. MR Industrial Accessories LLC supplies the line as part of its SKF bearing range and helps buyers match the code to the application.
Reading a designation tells you most of what you need. In E2.607-2Z/C3, the E2 prefix marks the SKF series with energy optimization, 607 gives the main dimensions, -2Z means two protective sheet metal shields rather than rubber seals, and /C3 sets internal radial clearance above normal. The same pattern holds for E2.608-2Z/C3 and E2.6000-2Z/C3: model number, 2Z protection, C3 clearance.
These bearings turn up in low and medium power electric motors, centrifugal pumps, fans, small compressors, machine tools and transmission equipment, as well as in automotive, appliance and agricultural machinery. Moderate speeds and combined loads are within their range, so plants commonly use them on production lines, conveyors and ventilation systems where reliability and low maintenance matter.
Selection comes down to radial and axial load, rotation speed and the surrounding conditions. The -2Z shields keep dust and dirt out but do not hold lubricant the way a rubber seal does, so consider -2RS variants where moisture or fine particles are present. C3 clearance suits interference fits, temperature differences between rings and high speeds. On mounting, align shaft and housing precisely and avoid striking the rings. Factory grease normally lasts the full service life; if you relubricate, use a compatible grease.
Interchange is possible with bearings from other makers that share the same standardized dimensions and a similar designation, including the 60, 62, 63 and 6000 series. Tolerances and clearance can differ from one manufacturer to another, so confirm the complete code and specifications before substituting.
For a quote on SKF E2 series bearings, send the exact code by WhatsApp or email. The team replies promptly, can point you to equivalents and helps you pick the variant that fits your equipment.
Dimensions
Dimensions and tolerances: Message us the part number on WhatsApp and we'll verify its dimensions and version with the manufacturer's datasheet.
Frequently asked questions
- What does the 2Z suffix indicate on an SKF bearing?
- It means the bearing carries two protective sheet metal shields, one per side. They block dust and dirt but are not hermetic, so they suit applications without moisture or fine particles.
- When is C3 clearance the right choice?
- C3 clearance fits interference fits on shaft or housing, high-speed operation with thermal differences, and cases where more tolerance to misalignment is needed.
- Can SKF E2 series bearings replace other brands?
- Yes, when dimensions are standardized and the designation is similar. Tolerances and clearance vary between manufacturers, so send the exact code and we will advise.