SKF C 6915 V/VE240 cARB roller bearing
- Brand
- SKF
- Category
- Bearings
- Subcategory
- CARB roller bearings
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Decoding SKF C 6915 V/VE240
- C 69Series
- CARB roller bearings, C 69 series. Series differ in outside diameter and width even when the bore is the same.
- 15Bore
- Bore 75 mm (15 × 5).
- V/VE240Suffix
- SKF suffix: identifies the variant, such as seals or shields, cage, internal clearance or other features.
C 6915 is the standard ISO basic designation, which sets the bearing type, series and bore.
Description
SKF C 6915 V/VE240 measures 75 mm across the bore and 105 mm across the outside diameter; its width is 54 mm (75 x 105 x 54 mm).
SKF C 6915 V/VE240 belongs to cARB roller bearing, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for C 6915 V/VE240 and any equivalents.
The SKF CARB C V/VE line covers self-aligning toroidal roller bearings built to carry roller-type loads while tolerating angular offset between shaft and housing. That behavior eases installation and lowers the precision demanded from seat alignment. Typical duty includes transmissions, gearboxes, mining and cement machinery, and any process where shafts flex or bore seats sit slightly off line.
Reading the code takes three steps. The C stands for the CARB family. The four digits that follow split into a two-digit dimension series plus a two-digit bore figure. Take C 4120 V/VE240: series 41, bore 20. In C 4126 V/VE240 the bore becomes 26, and in C 6915 V/VE240 the series is 69 with bore 15. The V/VE suffix belongs to the part number and is ordered exactly as printed, with no decoding of the letters.
These bearings suit gearboxes and gear units, mineral conveyors, mills, presses, cement equipment and process plants. They also fit wherever the shaft bends under load or the housing bore is not perfectly true, since the self-aligning geometry tracks that movement instead of building up parasitic stress. Maintenance crews on heavy equipment and high-load power transmissions reach for them often.
Selection starts with the shaft diameter and the housing dimensions, then the V/VE execution is fixed by the mounting arrangement. Rings must sit evenly supported and be aligned at the outset. Grease or oil choice follows operating speed and temperature, and fitting should be done with tooling that keeps rollers and raceways untouched. When the shaft deflects, the CARB design absorbs the offset without giving up load capacity.
Equivalent references from other makers that share the same series and bore naming can be used in place of SKF CARB bearings. If you only have another brand's number, or a part you cannot identify, we line it up against the C V/VE series and confirm the matching equivalent. Dimensions and execution decide interchangeability, not the series number alone.
For a quote on an SKF CARB bearing from the C series in V/VE execution, send the full part number by WhatsApp: C 4120 V/VE240, C 4126 V/VE240 or C 6915 V/VE240. We answer promptly and, when you supply another brand's number, point you to the compatible alternative.
Dimensions
75 x 105 x 54 mm (d x D x B): boundary dimensions for basic designation C 6915, according to ISO 15.
- Bore
- 75mm
- Outside diameter (D)
- 105mm
- Width (B)
- 54mm
Frequently asked questions
- SKF C 6915 V/VE240 bearing: what are its dimensions?
- SKF C 6915 V/VE240 measures 75 mm across the bore and 105 mm across the outside diameter; its width is 54 mm (75 x 105 x 54 mm). Those are the boundary dimensions standardized in ISO 15 for basic designation C 6915.
- Where are SKF CARB C V/VE bearings used?
- Gearboxes, gear units, conveyors, mills, presses and process equipment with high loads and possible misalignment. The self-aligning design fits shafts that deflect and housings that are not perfectly aligned.
- How do I get a quote for an SKF CARB bearing?
- Send the complete part number by WhatsApp, for example C 4120 V/VE240, C 4126 V/VE240 or C 6915 V/VE240. We reply promptly and, if you have another brand's number, tell you the compatible equivalent.
- What matters when mounting a CARB C V/VE bearing?
- Initial alignment, even support of the rings and lubrication matched to working speed and temperature. Use mounting tools that do not damage rollers or raceways. The self-aligning design absorbs misalignment, but careful mounting extends service life.