SKF C 4026-2CS5V cARB roller bearing
- Brand
- SKF
- Category
- Bearings
- Subcategory
- CARB roller bearings
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Decoding SKF C 4026-2CS5V
- C 40Series
- CARB roller bearings, C 40 series. Series differ in outside diameter and width even when the bore is the same.
- 26Bore
- Bore 130 mm (26 × 5).
- 2CS5VSuffix
- SKF suffix: identifies the variant, such as seals or shields, cage, internal clearance or other features.
C 4026 is the standard ISO basic designation, which sets the bearing type, series and bore.
Description
SKF C 4026-2CS5V measures 130 mm across the bore and 200 mm across the outside diameter; its width is 69 mm (130 x 200 x 69 mm).
SKF C 4026-2CS5V belongs to cARB roller bearing, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for C 4026-2CS5V and any equivalents.
SKF CARB bearings carry the letter C in their designation and belong to the toroidal roller family, which corrects shaft-to-housing misalignment while carrying radial and axial loads at the same time. The line is common in mining, cement, steel and power transmission work. As a supplier of this brand, MR Industrial Accessories LLC quotes the exact reference you list on your drawing or spare parts sheet.
Read the code from left to right: the C prefix opens the designation, the next digits set the series, and the last figures give the bore. So C 4013-2CS5V sits in series C 40 with bore 13, while C 5918-2CS5V belongs to series C 59 with bore 18. Suffixes such as 2CS5V are part of the commercial name, so quote them exactly as printed.
These bearings suit shafts that deflect or grow with heat: mills, kilns, conveyor belts, slurry pumps, industrial fans and other process equipment. Where a deep groove ball bearing cannot cope with imperfect alignment, a CARB unit offers high load capacity in a simple mounting arrangement.
Selection comes down to three inputs: radial load, axial load and running speed, plus the misalignment the assembly can tolerate. Shafts and housings need machined tolerances that match the bearing, and lubrication follows from the operating environment. Correct initial alignment and internal clearance both affect how the bearing performs, so the manufacturer's instructions for the application should be followed.
CARB bearings can be swapped for self-aligning bearings of other makes when dimensions and load capacity line up. If your reference comes from another brand, or the part is unmarked, send the data and we will point out the equivalent. We supply the SKF line and quote the exact part number you request.
Send your CARB bearing part number over WhatsApp or email. The team at MR Industrial Accessories LLC replies promptly, checks that the reference fits your equipment, and can suggest alternatives when needed. A model number or the main dimensions is enough to get started.
More SKF versions in the C 4026 series
SKF lists these C 4026 series versions in its catalogs, but they don't have a page on this site. Send us the part number of any of them and we'll find it and quote it.
- SKF C 4026 K30V
- SKF C 4026 V
Dimensions
130 x 200 x 69 mm (d x D x B): boundary dimensions for basic designation C 4026, according to ISO 15.
- Bore
- 130mm
- Outside diameter (D)
- 200mm
- Width (B)
- 69mm
Frequently asked questions
- SKF C 4026-2CS5V bearing: what are its dimensions?
- SKF C 4026-2CS5V measures 130 mm across the bore and 200 mm across the outside diameter; its width is 69 mm (130 x 200 x 69 mm). Those are the boundary dimensions standardized in ISO 15 for basic designation C 4026.
- What does the C in the designation tell me?
- It is the prefix that marks a bearing as part of the SKF CARB family of self-aligning toroidal roller bearings. Send the full designation and we will help you break it down.
- Which equipment typically uses CARB bearings?
- Units where shafts misalign or expand, such as mills, kilns, conveyors and pumps. Cement, mining and steel plants often rely on them for combined loads in demanding assemblies.
- How do I get a quote for an SKF CARB bearing?
- Message us on WhatsApp with the complete part number, for example C 4013-2CS5V, or with the housing dimensions. We confirm the reference and quote promptly.