SKF C 4022-2CS5V/C3GEM9 cARB roller bearing
- Brand
- SKF
- Category
- Bearings
- Subcategory
- CARB roller bearings
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Decoding SKF C 4022-2CS5V/C3GEM9
- C 40Series
- CARB roller bearings, C 40 series. Series differ in outside diameter and width even when the bore is the same.
- 22Bore
- Bore 110 mm (22 × 5).
- 2CS5V/C3GEM9Suffix
- SKF suffix: identifies the variant, such as seals or shields, cage, internal clearance or other features.
C 4022 is the standard ISO basic designation, which sets the bearing type, series and bore.
Description
SKF C 4022-2CS5V/C3GEM9 measures 110 mm across the bore and 170 mm across the outside diameter; its width is 60 mm (110 x 170 x 60 mm).
SKF C 4022-2CS5V/C3GEM9 belongs to cARB roller bearing, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for C 4022-2CS5V/C3GEM9 and any equivalents.
SKF CARB bearings are toroidal roller bearings that handle dynamic misalignment and combined loads. Their self-aligning capability makes them suitable for arrangements where shaft deflection occurs. This makes them a practical option for equipment where precise alignment is difficult to maintain.
The code C 4022-2CS5V/C3GEM9 can be broken down as follows: the C denotes the CARB family, 40 is the dimension series, and 22 is the size code. The suffixes carry the configuration details: 2CS stands for double contact seals, V indicates the cage and material variant, and C3 means internal radial clearance is greater than normal. Reading the designation this way helps you confirm that the variant matches the application.
These bearings are found in food processing, cement, mining and chemical plants, where shafts deflect or become misaligned. Typical equipment includes conveyors, mixers, slurry pumps and grinding mills. The self-aligning behavior helps lower wear and can contribute to longer assembly life in dusty or humid conditions.
When selecting a CARB bearing, consider radial and axial loads, operating speed and the surrounding environment. The 2CS seal keeps contaminants out and lubricant in; in a clean setting, an open version may be adequate. C3 clearance is advisable when thermal gradients or interference fits are present. During mounting, start with proper alignment and correct lubrication; the bearing's self-alignment handles deviations but does not replace careful installation.
SKF CARB bearings can be replaced by bearings from other manufacturers that use the same dimensional and suffix system, including equivalent series from European or Asian producers. Always check tolerances and radial clearance, since these can differ between makers. Interchange is possible when dimensions and operating conditions are respected. If you need help with equivalents, contact us.
For a CARB bearing for your equipment, send the complete code by WhatsApp or email. We can suggest equivalents and help you choose the correct variant for your application. Request a quote and receive personalized technical support.
Dimensions
110 x 170 x 60 mm (d x D x B): boundary dimensions for basic designation C 4022, according to ISO 15.
- Bore
- 110mm
- Outside diameter (D)
- 170mm
- Width (B)
- 60mm
Frequently asked questions
- SKF C 4022-2CS5V/C3GEM9 bearing: what are its dimensions?
- SKF C 4022-2CS5V/C3GEM9 measures 110 mm across the bore and 170 mm across the outside diameter; its width is 60 mm (110 x 170 x 60 mm). Those are the boundary dimensions standardized in ISO 15 for basic designation C 4022.
- What does the suffix 2CS mean in a CARB bearing?
- The 2CS suffix means the bearing has double contact seals, which block contaminants and help retain lubricant. This is suitable for dirty or humid environments.
- Can I replace a CARB bearing with one from another brand?
- Yes, if the main dimensions and radial clearance are the same. Always verify tolerances and ask us for equivalents to ensure proper operation.
- How do I choose between a sealed and an open CARB?
- If the environment contains dust, humidity or particles, select the sealed version. In clean environments with controlled lubrication, an open bearing may be sufficient.