SKF C 3060 M cARB roller bearing
- Brand
- SKF
- Category
- Bearings
- Subcategory
- CARB roller bearings
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Decoding SKF C 3060 M
- C 30Series
- CARB roller bearings, C 30 series. Series differ in outside diameter and width even when the bore is the same.
- 60Bore
- Bore 300 mm (60 × 5).
- MSuffix
- SKF suffix: identifies the variant, such as seals or shields, cage, internal clearance or other features.
C 3060 is the standard ISO basic designation, which sets the bearing type, series and bore.
Description
SKF C 3060 M measures 300 mm across the bore and 460 mm across the outside diameter; its width is 118 mm (300 x 460 x 118 mm).
SKF C 3060 M belongs to cARB roller bearing, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for C 3060 M and any equivalents.
The SKF CARB C M series covers self-aligning toroidal roller bearings. Their geometry lets the bearing handle shaft deflection and misalignment, which is common where shafts are long or supports sit far apart. You will find them in industrial drives, paper machines, mining equipment and other demanding duties. MR Industrial Accessories LLC supplies this line and can review your technical question with you.
Reading the code is straightforward. The C stands for the CARB series, a single-row toroidal roller bearing. The digits after it give the size, and the M suffix tells you the cage is machined brass, a choice suited to high speeds and loads. A part such as C 3164 M carries all of that information, so a complete part number is the fastest way to pin down the replacement you need.
Cement, mining, paper and steel operations are typical users, because their shafts flex and carry combined loads. Gearboxes, continuous process machines and material handling equipment also rely on this design. Self-aligning behavior helps when mounting is less than perfect, which is often the case in real plant conditions.
When you select a CARB bearing, look at the radial and axial load, the rotation speed and the lubrication method. Sealing may be open or shielded, depending on the environment. Respect the internal clearance and set a correct initial alignment, even though the bearing compensates for deviations afterward. Pick a lubricant that matches the temperature and contamination level, and choose seals in dirty surroundings.
On interchangeability, similar designs from other makers may work, but dimensions, tolerances and load capacity must be checked. A similar part number is not enough; compare the data sheet. Send MR the original part number and the working conditions, and we can guide you. Interchangeability always requires verification.
For a quote on a CARB C M bearing or a possible equivalent, send the part number by WhatsApp or email. MR works with SKF as a brand and can help you identify a suitable replacement for your equipment.
Dimensions
300 x 460 x 118 mm (d x D x B): boundary dimensions for basic designation C 3060, according to ISO 15.
- Bore
- 300mm
- Outside diameter (D)
- 460mm
- Width (B)
- 118mm
Frequently asked questions
- SKF C 3060 M bearing: what are its dimensions?
- SKF C 3060 M measures 300 mm across the bore and 460 mm across the outside diameter; its width is 118 mm (300 x 460 x 118 mm). Those are the boundary dimensions standardized in ISO 15 for basic designation C 3060.
- What does the M suffix mean in a CARB bearing?
- The M indicates a machined brass cage. It is durable and suited to high speeds or loads. External dimensions stay the same, but performance and heat dissipation are affected.
- How do I know if a CARB replaces another bearing?
- Part numbers alone are not enough. Check dimensions, load capacity, internal clearance and sealing type. The CARB has its own self-aligning characteristics. Send us the original part number and equipment conditions so we can evaluate the equivalence.
- Where are CARB bearings used in industry?
- They suit equipment with long shafts or distant supports, where flexing and misalignment occur. Typical places include gearboxes, paper machines, cement plants, mining and steel operations. Self-aligning capability helps reduce wear and unplanned downtime.