SKF BMB-6202/032S2/UA060A special bearing

SKF BMB-6202/032S2/UA060A belongs to special bearing, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for BMB-6202/032S2/UA060A and any equivalents.

The SKF BMB line covers bearing units built specifically for electric motors. Each reference is a code that ties together the base bearing size, the shaft diameter and the execution variant. These units suit motors that run under vibration, carry moderate radial and axial loads, and need accurate fitting. MR Industrial Accessories LLC supplies them as part of its special bearings range.

Reading a BMB code is a matter of splitting it into blocks. The BMB prefix tells you the unit is meant for an electric motor. Next comes the base bearing number, for instance 6202, 6204 or 6205, which sets the size. A slash and three digits then give the shaft diameter, such as 032 for 32 mm or 048 for 48 mm. The letter S plus a digit describes the sealing or protection type. The closing UA block with three digits points to the special execution, which can cover internal clearance, lubrication or specific tolerances. Two references that follow this pattern are BMB-6202/032S2/UA002A and BMB-6204/048S2/UA002A.

You will find these bearings in industrial electric motors that drive pumps, fans, conveyor belts and machine tools. They also appear in refrigeration equipment and in setups with frequency inverters, where parasitic currents can be a concern. In demanding sectors such as metallurgy, food processing and petrochemicals, motors often run nonstop and face dust, humidity or shifting temperatures. The BMB series gives a compact, dependable option for those conditions.

Choosing the right reference starts with the shaft diameter, the load type and the environment. Check that the sealing matches the contamination level; the S and UA suffixes stand for configurations that are not always interchangeable. When mounting, keep the shaft and housing precisely aligned and use the correct tools so the seals stay intact. Apply only the lubricant specified for that execution. Poor mounting shortens bearing life.

Other brands may list similar designations for SKF BMB bearings, but this type of unit has no universal standardization. Every manufacturer sets its own codes for shaft diameter, sealing and special execution. For a replacement, compare the critical dimensions and operating conditions rather than relying on the code alone. If anything is unclear, send us the original code and your shaft measurements.

To get a quote for the SKF BMB bearing you need, send the complete code by WhatsApp. MR Industrial Accessories LLC will help you match the right execution to your application and can also walk you through the designation if the suffixes are unclear.