SKF AHX 3026 withdrawal sleeve
- Brand
- SKF
- Category
- Bushings and sleeves
- Subcategory
- Withdrawal sleeve
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
SKF and FAG: matching part numbers →SKF and NSK: matching part numbers →SKF and TIMKEN: matching part numbers →SKF and BGL: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
SKF AHX 3026 belongs to withdrawal sleeve, part of our Bushings and sleeves range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for AHX 3026 and any equivalents.
The SKF AHX series withdrawal sleeve is a maintenance component used to remove bearings that are mounted on adapter sleeves. It fits between the bearing and the lock nut; turning the nut pushes the bearing out of its seat in a controlled way. This allows bearings to be dismounted without damaging the bearing or the shaft.
The AHX prefix identifies a withdrawal sleeve. The following numbers match the bearing or adapter sleeve series it serves: AHX 310 works with 310 series bearings, while AHX 2310 works with 2310 series bearings. Suffixes may indicate design variants such as a different length or a surface treatment. Always confirm that the sleeve is compatible with your specific bearing and adapter sleeve.
These sleeves are common in plants that run conveyors, mills, pumps, fans and gearboxes with bearings on adapter sleeves. In industries such as metallurgy, cement, mining, food and petrochemical, they help speed up bearing replacement and reduce the risk of damage to components during dismounting.
To select the right sleeve, first identify the bearing and the adapter sleeve in use. The withdrawal sleeve must match the lock nut in both diameter and thread. During assembly, lubricate the thread and the contact surface to help sliding and prevent seizing. Follow the manufacturer's instructions for tightening torque and assembly sequence. Correct alignment and clean surfaces also help prevent premature damage.
Withdrawal sleeves from different brands can be interchangeable when dimensions and thread match. However, designations are not always the same across manufacturers. Verify the actual measurements and consult a specialist before replacing a part. MR supplies the SKF brand and can advise you on compatibility with other brands.
To request a quote for an SKF AHX series withdrawal sleeve, send the exact part number from your bearing or adapter sleeve via WhatsApp or email. MR helps you identify the correct part and answers your technical questions.
Dimensions
Dimensions and tolerances: Message us the part number on WhatsApp and we'll verify its dimensions and version with the manufacturer's datasheet.
Frequently asked questions
- What is the difference between a withdrawal sleeve and an adapter sleeve?
- The adapter sleeve mounts the bearing on the shaft, while the withdrawal sleeve removes it. They work together: the adapter sleeve stays mounted and the withdrawal sleeve is placed temporarily to help with extraction.
- How do I know which withdrawal sleeve I need for my bearing?
- Identify the bearing and the adapter sleeve first. The withdrawal sleeve code is usually related to the bearing code. For example, a 2310 bearing uses an AHX 2310. Send us the code and we will advise you.
- Are SKF withdrawal sleeves compatible with other brands?
- They can be compatible if dimensions and thread match, but there is no universal interchangeability standard. Always verify the actual measurements and consult a specialist before replacing one part with another brand.