SKF 95X120X12 CRWA1 V radial shaft seal
- Brand
- SKF
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
SKF 95X120X12 CRWA1 V belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 95X120X12 CRWA1 V and any equivalents.
The SKF CRWA1 V series includes single-lip radial shaft seals with a metal case and elastomer lip, built to retain oil or grease on rotating shafts. They are used in gearboxes, pumps, electric motors, and other power transmission equipment to prevent leaks and block dust or water entry. MR supplies this line and helps you select the right size for your shaft and housing.
A seal's part number encodes its key dimensions. For example, in 45X62X8 CRWA1 V, the first value is the shaft diameter, the second is the outer diameter, and the third is the width, all in millimeters. The CRWA1 section identifies the seal construction, while the final V denotes the lip type and material. This format lets you specify a part precisely when requesting a quote.
These seals suit many industrial applications across the US, Canada, Mexico, and South America. They are installed in gearboxes, centrifugal pumps, electric motors, mixers, and belt conveyors, as well as in agricultural and road equipment where shafts rotate in dusty or wet conditions. The series spans small to large shafts, as seen in 95X120X12 CRWA1 V and 280X320X20 CRWA1 V.
To choose the right seal, measure the shaft and housing diameters, the available width, and note the rotation speed. The lip must stay lubricated; for dry running, a different compound may be needed. During installation, align the seal with the shaft, use a support tube to avoid damaging the lip, and avoid impacts. Shaft runout and axial play also affect seal life.
When comparing brands, radial shaft seals are matched by dimensions and lip type, not by manufacturer. A seal from another company can replace an SKF one if the diameters, width, and lip material are the same. MR can help you confirm interchangeability if you are deciding between options.
If you have the part number or dimensions of your seal, send them to MR via WhatsApp or email for a prompt quote. You can also ask about other seal series we carry. Providing accurate data helps avoid downtime and repeat purchases.
Dimensions
Dimensions and tolerances: Message us the part number on WhatsApp and we'll verify its dimensions and version with the manufacturer's datasheet.
Frequently asked questions
- What do the numbers in an SKF CRWA1 V part number mean?
- The three numbers separated by X are the shaft diameter, outer diameter, and width in millimeters. The CRWA1 block identifies the construction and the V the lip type. With those dimensions you can find an equivalent part.
- How does a CRWA1 V seal differ from another seal of the same size?
- The difference lies in the lip design, material, and intended use. Two seals with identical dimensions may have different permissible speeds, temperatures, and fluid resistance. Always check the full part number.
- Can I use a different brand instead of an SKF seal?
- Yes, if the shaft diameter, outer diameter, width, and lip type match. Interchangeability is based on dimensions and material, not brand. Send us the part number or dimensions and we will verify it.