SKF 7315 BEM1/S0VQ335 angular contact ball bearing
- Brand
- SKF
- Category
- Bearings
- Subcategory
- Angular contact ball bearings
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Decoding SKF 7315 BEM1/S0VQ335
- 73Series
- Angular contact ball bearings, 73 series. Series differ in outside diameter and width even when the bore is the same.
- 15Bore
- Bore 75 mm (15 × 5).
- BEM1/S0VQ335Suffix
- SKF suffix: identifies the variant, such as seals or shields, cage, internal clearance or other features.
7315 is the standard ISO basic designation, which sets the bearing type, series and bore.
Description
SKF 7315 BEM1/S0VQ335 measures 75 mm across the bore and 160 mm across the outside diameter; its width is 37 mm (75 x 160 x 37 mm).
SKF 7315 BEM1/S0VQ335 belongs to angular contact ball bearing, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 7315 BEM1/S0VQ335 and any equivalents.
SKF angular contact bearings handle shafts that see both radial and axial forces at the same time. The raceways are offset, so the balls contact them at an angle. This gives the bearing high load capacity and stiffness. You will find them in pumps, compressors, gearboxes and spindles where precision and reliability matter. MR Industrial Accessories supplies this line and can help you match the exact part number to your equipment.
The part number tells you what you are getting. Take 7315 BEM1/S0VQ335: the digits 7315 set the size and dimensional series. The B means a 40° contact angle. EM indicates a machined brass cage. The /S0 suffix points to a special internal clearance, and VQ335 covers a particular precision or temperature specification. Reading these codes correctly is how you avoid ordering the wrong replacement.
These bearings show up in pumping equipment, induced draft fans, gearboxes and machine tool spindles. You will also find them in automotive and railway applications. Because they take combined loads, they suit assemblies where the shaft must stay aligned with high rigidity. MR Industrial Accessories serves sectors from petrochemical plants to maintenance workshops across the United States and several Latin American countries.
Selection depends on the direction of the axial load, the rotation speed and the environment. Choose seals or shields based on contamination levels and whether you need to retain lubricant. Internal clearance and preload change rigidity and service life, and a poor mounting fit can lead to early failure. Correct lubrication and precise alignment between shaft and housing are essential.
Cross-brand equivalents exist for this bearing type, but they are not always directly interchangeable. Contact angle, cage and internal clearance can differ from one manufacturer to another. When you look for a replacement, check that the full part number matches in dimensions and specifications. If anything is unclear, our technical team can explain the differences and help you find the right option.
If you need an SKF angular contact bearing, send the complete part number by WhatsApp or email. MR Industrial Accessories will advise you so you receive the correct product for your equipment. Request a quote and let our experience in bearings and power transmission work for you.
Dimensions
75 x 160 x 37 mm (d x D x B): boundary dimensions for basic designation 7315, according to ISO 15.
- Bore
- 75mm
- Outside diameter (D)
- 160mm
- Width (B)
- 37mm
Same size, other brands
Other brands' pages with basic designation 7315: 75 x 160 x 37 mm (d x D x B) per ISO 15.
- FAG7315-B-XL-JP7315-B-XL-TVP
- NSK7315 A7315 BEA
- NTN73157315B
- RKB7315
- TIMKEN7315 B
What they share are the ISO 15 boundary dimensions, not the specs: seals or shields, internal clearance, cage and load rating may vary with brand and suffix. Every quote is by full part number.
Frequently asked questions
- SKF 7315 BEM1/S0VQ335 bearing: what are its dimensions?
- SKF 7315 BEM1/S0VQ335 measures 75 mm across the bore and 160 mm across the outside diameter; its width is 37 mm (75 x 160 x 37 mm). Those are the boundary dimensions standardized in ISO 15 for basic designation 7315.
- What does the BEM1 suffix mean on an SKF bearing?
- The suffix BEM1 describes design features: B is a 40° contact angle, EM is a machined brass cage, and 1 is an internal design variant. These details affect load capacity and limiting speed, so keep the original part number when replacing.
- How do I choose between an angular contact bearing and a deep groove ball bearing?
- An angular contact bearing supports axial loads in one direction and must be mounted in pairs for combined loads. A deep groove ball bearing takes moderate radial and axial loads in both directions. If your application has significant axial load, the angular contact bearing is the recommended option.
- Can I replace an SKF with another brand without problems?
- Generally yes, but you must verify that the equivalent part number matches in dimensions, contact angle, cage and internal clearance. Not all brands use the same nomenclature. Consult us with the original part number and we will indicate the compatible alternative.