SKF 7236 BCAM angular contact ball bearing
- Brand
- SKF
- Category
- Bearings
- Subcategory
- Angular contact ball bearings
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Decoding SKF 7236 BCAM
- 72Series
- Angular contact ball bearings, 72 series. Series differ in outside diameter and width even when the bore is the same.
- 36Bore
- Bore 180 mm (36 × 5).
- BCAMSuffix
- SKF suffix: identifies the variant, such as seals or shields, cage, internal clearance or other features.
7236 is the standard ISO basic designation, which sets the bearing type, series and bore.
Description
SKF 7236 BCAM measures 180 mm across the bore and 320 mm across the outside diameter; its width is 52 mm (180 x 320 x 52 mm).
SKF 7236 BCAM belongs to angular contact ball bearing, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 7236 BCAM and any equivalents.
The SKF BCAM series covers single-row angular contact bearings built to carry radial and axial loads acting in one direction. The 40° contact angle gives the bearing stiffness and suits higher running speeds, which is why this series shows up in equipment where positioning accuracy matters. MR Industrial Accessories LLC supplies these bearings to maintenance and purchasing teams across the United States and in several Latin American countries.
Reading the suffix helps you confirm you are ordering the right variant. In BCAM, the B stands for the single-row layout with a 40° contact angle, the C for a machined brass cage, the A for an optimized internal design, and the M for a brass cage guided by the balls. Take 7236 BCAM as an example: 72 is the dimension series and 36 is the bore diameter. Once you know how the letters work, you can tell apart versions that differ in cage or contact angle.
Typical duty includes machine tool spindles, centrifugal pumps, compressors, gearboxes and transmission equipment, all of which see radial and axial loads at the same time. Metalworking, food processing and petrochemical plants rely on this type of bearing because precision and load capacity keep production running and unplanned downtime low.
Selection comes down to how large and which way the loads act, the rotation speed and the surrounding conditions. Alignment during mounting has to be accurate, and preload is often needed to take out axial clearance. Grease or oil selection follows temperature and speed, while sealing depends on how much contamination is present. Poor mounting shortens service life, so the manufacturer's instructions should be followed.
Bearings of this type from other makers can serve as equivalents when dimensions and load capacity line up, but tolerances and contact angle still need checking. The brass cage of the BCAM series handles high temperatures and speeds well, and since internal configurations differ between brands, the application should be validated before substituting.
If you want help choosing an SKF BCAM series angular contact bearing, send the full part number by WhatsApp or email. Our team replies promptly, can suggest equivalents and assists with the selection.
Dimensions
180 x 320 x 52 mm (d x D x B): boundary dimensions for basic designation 7236, according to ISO 15.
- Bore
- 180mm
- Outside diameter (D)
- 320mm
- Width (B)
- 52mm
Same size, other brands
Other brands' pages with basic designation 7236: 180 x 320 x 52 mm (d x D x B) per ISO 15.
What they share are the ISO 15 boundary dimensions, not the specs: seals or shields, internal clearance, cage and load rating may vary with brand and suffix. Every quote is by full part number.
Frequently asked questions
- SKF 7236 BCAM bearing: what are its dimensions?
- SKF 7236 BCAM measures 180 mm across the bore and 320 mm across the outside diameter; its width is 52 mm (180 x 320 x 52 mm). Those are the boundary dimensions standardized in ISO 15 for basic designation 7236.
- What does BCAM indicate in an SKF bearing designation?
- It points to a single-row bearing with a 40° contact angle, a machined brass cage and an optimized internal design. Together these allow significant axial load capacity, high speeds and good rigidity.
- How should an angular contact bearing be mounted?
- With accurate alignment and, depending on the application, preload to remove axial clearance. Following the manufacturer's instructions and using the right tools protects the raceways and helps service life.
- Where are BCAM bearings used?
- In machine tool spindles, pumps, compressors, gearboxes and transmission equipment where radial and axial loads occur together. Metalworking, food and petrochemical operations are common settings.