SKF 7206 BE-2RZP angular contact ball bearing
- Brand
- SKF
- Category
- Bearings
- Subcategory
- Angular contact ball bearings
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Decoding SKF 7206 BE-2RZP
- 72Series
- Angular contact ball bearings, 72 series. Series differ in outside diameter and width even when the bore is the same.
- 06Bore
- Bore 30 mm (06 × 5).
- BE-2RZPSuffix
- SKF suffix: identifies the variant, such as seals or shields, cage, internal clearance or other features.
7206 is the standard ISO basic designation, which sets the bearing type, series and bore.
Description
SKF 7206 BE-2RZP measures 30 mm across the bore and 62 mm across the outside diameter; its width is 16 mm (30 x 62 x 16 mm).
SKF 7206 BE-2RZP belongs to angular contact ball bearing, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 7206 BE-2RZP and any equivalents.
The SKF BE-2RZP is a single row angular contact bearing fitted with two low-friction seals. It handles combined radial and axial loads while keeping lubricant in and contaminants out. You will find it in pumps, electric motors, gearboxes and other transmission equipment. MR Industrial Accessories supplies it as part of its SKF bearing range.
Reading the code helps you confirm you are ordering the right piece. The basic number identifies the series and bore: for instance, 7202 and 7204 belong to the 72 series, single row angular contact, with different bore sizes. The BE suffix covers the optimized internal design and a contact angle suited to axial loads in one direction. The 2RZP suffix tells you there are two low-friction seals, one per side, protecting against dust and moisture and keeping the grease in place. That combination works well where contamination is moderate.
These bearings suit equipment where axial and radial forces act at the same time. Typical installations include centrifugal pumps, electric motors, fans, gearboxes and machine tools, as well as power transmission setups such as conveyor drives. The double sealing makes them a practical choice where maintenance access is limited or where dust and moisture are present.
Selection comes down to the axial load the bearing will see, its direction and the rotation speed. Because the 2RZP seal is factory-lubricated, no relubrication is needed. Mount it with the seal facing the side you want to protect, and make sure the shaft and housing are properly aligned to avoid extra stresses. If the axial load acts in only one direction, mounting in pairs allows both directions to be covered. Clean seating and the right tools prevent seal damage during assembly.
When replacing a bearing, you will often come across equivalents from other makers. Suffixes for sealing, internal clearance or precision differ from one brand to the next. For sealed angular contact bearings, check that the other code includes the same double sealing, optimized internal design and dimensions. Comparing specifications rather than just the basic number is the safer route.
Send the full code by WhatsApp or email and the team will reply promptly with a quote. They can also suggest equivalents and help you choose the option that fits your equipment.
Dimensions
30 x 62 x 16 mm (d x D x B): boundary dimensions for basic designation 7206, according to ISO 15.
- Bore
- 30mm
- Outside diameter (D)
- 62mm
- Width (B)
- 16mm
Same size, other brands
Other brands' pages with basic designation 7206: 30 x 62 x 16 mm (d x D x B) per ISO 15.
- FAG7206-B-XL-JP7206-B-XL-TVP7206-B-XL-2RS-TVP
- NSK7206 A7206 B7206 BEAT85
- NTN72067206B7206C
- RKB7206
- TIMKEN7206 B
What they share are the ISO 15 boundary dimensions, not the specs: seals or shields, internal clearance, cage and load rating may vary with brand and suffix. Every quote is by full part number.
Frequently asked questions
- SKF 7206 BE-2RZP bearing: what are its dimensions?
- SKF 7206 BE-2RZP measures 30 mm across the bore and 62 mm across the outside diameter; its width is 16 mm (30 x 62 x 16 mm). Those are the boundary dimensions standardized in ISO 15 for basic designation 7206.
- What does the 2RZP suffix mean on an SKF bearing?
- It means the bearing has two low-friction seals, one on each side. They retain lubrication and block contaminants, which helps in environments with dust or moisture.
- Does this bearing need relubrication?
- No. Bearings with 2RZP sealing come lubricated for life and do not require relubrication. Correct assembly and avoiding seal damage during installation are what matter.
- Can I replace another brand's bearing with this SKF one?
- Yes, provided the dimensions and characteristics match. Confirm that the other bearing has double sealing and the same internal design. Send us the code and we will help you find the equivalent.