SKF 7202 CD/HCP4A angular contact ball bearing
- Brand
- SKF
- Category
- Bearings
- Subcategory
- Angular contact ball bearings
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Decoding SKF 7202 CD/HCP4A
- 72Series
- Angular contact ball bearings, 72 series. Series differ in outside diameter and width even when the bore is the same.
- 02Bore
- Bore 15 mm: by standard, 02 designates 15 mm.
- CD/HCP4ASuffix
- SKF suffix: identifies the variant, such as seals or shields, cage, internal clearance or other features.
7202 is the standard ISO basic designation, which sets the bearing type, series and bore.
Description
SKF 7202 CD/HCP4A measures 15 mm across the bore and 35 mm across the outside diameter; its width is 11 mm (15 x 35 x 11 mm).
SKF 7202 CD/HCP4A belongs to angular contact ball bearing, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 7202 CD/HCP4A and any equivalents.
Angular contact bearings from SKF are built to carry radial and axial loads together in one direction. The angled raceways let them run at high speed with good rigidity, which is why they show up in spindles, pumps, compressors and other work where accuracy matters. MR Industrial Accessories supplies this line.
Reading the part number is the first step in picking a replacement. The basic number gives the size and series. CD covers the contact angle and the high-capacity internal layout. HCP4A tells you the cage is phenolic, the inner ring is made of high-strength stainless steel, and the tolerance class is P4A for demanding assemblies. Decoding these suffixes correctly keeps you from ordering the wrong unit.
Typical service includes machine tool spindles, centrifugal pumps, screw compressors, high-speed electric motors and power transmission equipment. Milling heads and boring shafts are other common spots, since precision and rigidity are critical there. The ability to turn at high revolutions makes these bearings a fit for metalworking, food processing and petrochemical operations.
Selection comes down to the axial load the bearing will see, the speed of rotation and the lubrication method. Fitting calls for careful alignment and, in many cases, preload so contact is correct. Keeping the surrounding area clean and properly sealed helps avoid contamination. Grease or oil both work as lubricants depending on the application. Check internal clearance along with shaft and housing tolerances before installation.
Interchange between brands exists for this bearing type, but it is not universal: each maker sets its own suffixes and tolerance classes. When you are sourcing a replacement, compare the contact angle, cage and precision class as well as the basic number. MR Industrial Accessories can guide you on interchangeability so equipment performance is not affected.
To get a quote on an SKF angular contact bearing, send the complete part number by WhatsApp or email. MR Industrial Accessories replies with the technical details you need for your maintenance job or project, and can also point you to other brands or equivalent references.
Dimensions
15 x 35 x 11 mm (d x D x B): boundary dimensions for basic designation 7202, according to ISO 15.
- Bore
- 15mm
- Outside diameter (D)
- 35mm
- Width (B)
- 11mm
Same size, other brands
Other brands' pages with basic designation 7202: 15 x 35 x 11 mm (d x D x B) per ISO 15.
- FAG7202-B-XL-JP7202-B-XL-TVP7202-B-XL-2RS-TVP
- NSK7202 AW7202 BW7202 BEAT85
- NTN72027202B7202C
- RKB7202
- TIMKEN7202 B
What they share are the ISO 15 boundary dimensions, not the specs: seals or shields, internal clearance, cage and load rating may vary with brand and suffix. Every quote is by full part number.
Frequently asked questions
- SKF 7202 CD/HCP4A bearing: what are its dimensions?
- SKF 7202 CD/HCP4A measures 15 mm across the bore and 35 mm across the outside diameter; its width is 11 mm (15 x 35 x 11 mm). Those are the boundary dimensions standardized in ISO 15 for basic designation 7202.
- What do the CD and HCP4A suffixes indicate on an SKF bearing?
- CD stands for a high-capacity design with a 15° contact angle. HCP4A means a phenolic cage, a stainless steel inner ring and P4A precision tolerance, which suits high-accuracy work.
- Which applications use SKF angular contact bearings?
- Machine tool spindles, pumps, compressors, high-speed motors and similar equipment where combined loads must be handled with precision and rigidity.
- How do I request a quote for these bearings from MR?
- Send the complete bearing part number by WhatsApp or email to MR Industrial Accessories. The team will reply with the technical information for your application.