SKF 7014 CD/P4ADBC angular contact ball bearing
- Brand
- SKF
- Category
- Bearings
- Subcategory
- Angular contact ball bearings
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Decoding SKF 7014 CD/P4ADBC
- 70Series
- Angular contact ball bearings, 70 series. Series differ in outside diameter and width even when the bore is the same.
- 14Bore
- Bore 70 mm (14 × 5).
- CD/P4ADBCSuffix
- SKF suffix: identifies the variant, such as seals or shields, cage, internal clearance or other features.
7014 is the standard ISO basic designation, which sets the bearing type, series and bore.
Description
SKF 7014 CD/P4ADBC belongs to angular contact ball bearing, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 7014 CD/P4ADBC and any equivalents.
SKF angular contact bearings handle radial and axial forces at the same time. Their raceways sit at an angle, which suits equipment that needs accuracy and stiffness. MR Industrial Accessories LLC supplies these bearings to maintenance and purchasing teams in the United States and several Latin American countries.
The part number tells you most of what you need. Take 7014 CD/P4ADBC: 7014 is the dimension series, with a 70 mm bore and a series 10 outer diameter. CD is the angular contact design with a brass cage and a 15° contact angle. P4 is the precision class, comparable to ABEC 7. ADBC means a universal duplex set arranged back-to-back with light preload. Reading the code this way speeds up identification on the shop floor.
These bearings fit machine tool spindles, high-pressure pumps, compressors, electric motors and transmission equipment. They are common in metalworking, automotive, food and process plants, where uptime and accuracy matter. Because they take axial loads in both directions, they work in a range of arrangements.
Selection comes down to a few points: mounting style (single, duplex, triplex), clearance or preload, sealing (open, shielded or sealed) and lubrication. The shaft and housing must be aligned to avoid extra loads. Check the limiting speed and operating temperature as well. Poor installation shortens bearing life, so follow good mounting practices and use the right tools.
For replacements, bearings from other makers that use the same international designation, such as FAG, NSK, NTN or Timken, can be considered when dimensions and precision class match. Tolerances and internal design can differ, which may affect load capacity and rigidity. Our team can review your application and suggest equivalents.
To request a quote, send the complete code, for example 7014 CD/P4ADBC, along with your operating conditions via WhatsApp or email. We reply promptly and help you choose the right bearing for your equipment.
Dimensions
- Bore
- 70mm
Frequently asked questions
- What does the CD suffix mean on an SKF bearing?
- CD indicates an angular contact design with a machined brass cage and a 15° contact angle. This gives higher axial load capacity and rigidity than some other designs. Always check the technical data for your specific application.
- How is a duplex angular contact bearing mounted?
- Duplex mounting can be back-to-back, face-to-face or tandem. The ADBC suffix indicates a universal back-to-back arrangement with light preload. Follow the manufacturer's instructions and use suitable tools to get the fit right.
- What should I check when replacing an angular contact bearing?
- Confirm dimensions, precision class and internal clearance. The new bearing should have the same load capacity and configuration. Clean the housing and shaft, and lubricate properly before mounting. Our technical team can help you avoid mistakes.