SKF 7010 ACD/P4AQBTBVJ150 angular contact ball bearing
- Brand
- SKF
- Category
- Bearings
- Subcategory
- Angular contact ball bearings
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Decoding SKF 7010 ACD/P4AQBTBVJ150
- 70Series
- Angular contact ball bearings, 70 series. Series differ in outside diameter and width even when the bore is the same.
- 10Bore
- Bore 50 mm (10 × 5).
- ACD/P4AQBTBVJ150Suffix
- SKF suffix: identifies the variant, such as seals or shields, cage, internal clearance or other features.
7010 is the standard ISO basic designation, which sets the bearing type, series and bore.
Description
SKF 7010 ACD/P4AQBTBVJ150 belongs to angular contact ball bearing, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 7010 ACD/P4AQBTBVJ150 and any equivalents.
Angular contact bearings from SKF handle radial and axial forces that act in one direction. The angled raceway gives the bearing the stiffness and accuracy needed for demanding assemblies. Machine tools, pumps, motors and transmission units are common places to find them.
The part number tells you what you are holding. Take 7008 ACD/P4AQBTBVJ150: 7008 is the size and series, ACD covers the contact angle and internal geometry, P4A is the precision class, and QBTBVJ150 describes a pre-adjusted set with a defined row arrangement. Reading the code correctly is the first step in matching a bearing to the job.
These bearings appear in machine tool spindles, centrifugal pumps, compressors, gearboxes and electric motors that run under continuous demand. Their construction suits assemblies where combined loads and rigidity matter, including high-speed operation.
Selection comes down to sealing, internal clearance and lubrication. Open or sealed versions are available depending on how dirty or wet the surroundings are. Clearance must match the operating conditions and the mounting method. Grease or oil affects both service life and limiting speed. Careful alignment during installation avoids extra stress on the bearing.
Interchangeability is possible with other brands when dimensions, tolerances and precision class line up. Check the technical data before substituting, especially the precision class. We can review the options for your equipment and suggest a suitable equivalent.
To request a quote, send the complete code by WhatsApp or email. Our team will confirm the exact product and help with questions about application, mounting or maintenance.
Dimensions
- Bore
- 50mm
Frequently asked questions
- What does the ACD suffix mean on an SKF bearing?
- The ACD suffix indicates a 25° contact angle and a high-strength polyamide cage. This design supports axial loads in one direction and simplifies mounting in pre-adjusted sets.
- How do I choose between a sealed and an open bearing?
- In dusty, wet or particle-heavy environments, a sealed bearing keeps the lubricant in place. In clean, high-speed applications, an open bearing allows better heat dissipation and continuous lubrication.
- Can I replace an SKF bearing with another brand?
- Yes, provided the dimensions, tolerances and precision class match. Verify the technical specifications and contact us to confirm compatibility and performance in your equipment.