SKF 6322/HC5C3T deep groove ball bearing
- Brand
- SKF
- Category
- Bearings
- Subcategory
- Deep groove ball bearings
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Decoding SKF 6322/HC5C3T
- 63Series
- Deep groove ball bearings, 63 series. Series differ in outside diameter and width even when the bore is the same.
- 22Bore
- Bore 110 mm (22 × 5).
- HC5C3TSuffix
- SKF suffix: identifies the variant, such as seals or shields, cage, internal clearance or other features.
6322 is the standard ISO basic designation, which sets the bearing type, series and bore.
Description
SKF 6322/HC5C3T measures 110 mm across the bore and 240 mm across the outside diameter; its width is 50 mm (110 x 240 x 50 mm).
SKF 6322/HC5C3T belongs to deep groove ball bearing, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 6322/HC5C3T and any equivalents.
The SKF 6322/HC5C3T is a single row deep groove ball bearing that handles radial and axial loads in both directions. Its special execution matches the part number you specify. Used where precise shaft guidance and low friction are essential, this bearing is quoted by part number to ensure you receive the exact reference your equipment requires.
The part number 6322/HC5C3T breaks down into two sections. The bore number 6322 indicates the bearing size, while the letters after the slash define the execution. When you send us the complete part number, we quote it exactly as it appears, so you get the correct reference.
These bearings are common in electric motors, pumps, fans, gearboxes, conveyors and machine tools. They operate at high speeds and need a clean, well-aligned seat to keep the shaft rotating without vibration or overheating.
Selecting the right execution depends on load type, rotation speed and the mounting environment. During installation, keep the shaft and housing clean, avoid striking the raceway, and verify alignment before tightening. Lubrication and clearance must match the part number on the equipment, so request a quote with the full reference.
If you provide a part number from another brand, we find the equivalent by bore number and execution type and suggest a compatible alternative. When the part has no legible identification, send us the shaft and housing dimensions and we will quote it anyway. This way you avoid guessing the reference.
Send the part number 6322/HC5C3T or any other you need via WhatsApp or email, and our team will reply promptly. We can also suggest equivalents and help you choose the right execution for your equipment.
Dimensions
110 x 240 x 50 mm (d x D x B): boundary dimensions for basic designation 6322, according to ISO 15.
- Bore
- 110mm
- Outside diameter (D)
- 240mm
- Width (B)
- 50mm
Same size, other brands
Other brands' pages with basic designation 6322: 110 x 240 x 50 mm (d x D x B) per ISO 15.
What they share are the ISO 15 boundary dimensions, not the specs: seals or shields, internal clearance, cage and load rating may vary with brand and suffix. Every quote is by full part number.
Frequently asked questions
- SKF 6322/HC5C3T bearing: what are its dimensions?
- SKF 6322/HC5C3T measures 110 mm across the bore and 240 mm across the outside diameter; its width is 50 mm (110 x 240 x 50 mm). Those are the boundary dimensions standardized in ISO 15 for basic designation 6322.
- How do I request a quote for an SKF deep groove ball bearing?
- Send the complete part number, such as 6322/HC5C3T, through WhatsApp or email. If you have another brand's part number or an unidentified part, include the shaft and housing dimensions.
- What applications use these bearings?
- They are found in electric motors, pumps, fans, gearboxes, conveyors and machine tools, where precise shaft guidance, low friction and radial and axial load capacity in both directions are required.
- Can I replace a bearing from another brand with an SKF one?
- Yes. Provide the other brand's part number and we will find the equivalent by bore number and execution type, then suggest a compatible alternative. If the part lacks identification, we can quote from the shaft and housing dimensions.