SKF 6313/VA201 deep groove ball bearing
- Brand
- SKF
- Category
- Bearings
- Subcategory
- Deep groove ball bearings
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Decoding SKF 6313/VA201
- 63Series
- Deep groove ball bearings, 63 series. Series differ in outside diameter and width even when the bore is the same.
- 13Bore
- Bore 65 mm (13 × 5).
- VA201Suffix
- SKF suffix: identifies the variant, such as seals or shields, cage, internal clearance or other features.
6313 is the standard ISO basic designation, which sets the bearing type, series and bore.
Description
SKF 6313/VA201 measures 65 mm across the bore and 140 mm across the outside diameter; its width is 33 mm (65 x 140 x 33 mm).
SKF 6313/VA201 belongs to deep groove ball bearing, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 6313/VA201 and any equivalents.
SKF VA201 series deep groove ball bearings are built for heat-exposed rotation points. Each bearing uses a steel sheet cage and a lubricant formulated for high temperatures, so it keeps working where standard bearings would break down. Typical settings include furnaces, induced draft fans and foundry conveyors. MR Industrial Accessories supplies this line and helps you match the right size to your equipment.
Reading the code is straightforward. The base number gives series and size: 62 is the medium section, while 63 is wider and carries more capacity. Common base numbers in this range are 6202, 6203, 6204, 6206, 6208, 6209, 6210 and 6305. The /VA201 suffix then marks the special execution: steel sheet cage plus high-temperature grease. Once you know that pattern, you can tell at a glance what a bearing is meant for.
These bearings suit plants where heat drives bearing failure: foundries, industrial furnaces, heat treatment lines, induced draft fans, clinker conveyors and drying equipment. They are also used in the metallurgical, cement, ceramic and food sectors. Because the lubricant holds up under thermal load, the bearing keeps rotating at points exposed to radiant or convective heat.
When selecting, check operating temperature, load and speed. The VA201 execution covers a defined thermal range, so confirm it fits your case. During mounting, keep alignment correct and avoid impacts that could mark the raceways. The factory fill is part of the execution and should not be swapped for standard grease. In dusty or damp areas, add suitable protection.
Other makers offer heat-treated bearings with high-temperature lubricants, but the designations differ. There is no automatic universal interchange, so always verify dimensions, internal clearance and maximum permissible temperature. MR Industrial Accessories can point you to market alternatives that respect your equipment's specifications.
For a replacement, send the complete code on WhatsApp or by email. MR Industrial Accessories will help you confirm the right option for your application, combining technical support with the brands we supply.
More SKF versions in the 6313 series
SKF lists these 6313 series versions in its catalogs, but they don't have a page on this site. Send us the part number of any of them and we'll find it and quote it.
- SKF 6313 N
Dimensions
65 x 140 x 33 mm (d x D x B): boundary dimensions for basic designation 6313, according to ISO 15.
- Bore
- 65mm
- Outside diameter (D)
- 140mm
- Width (B)
- 33mm
Same size, other brands
Other brands' pages with basic designation 6313: 65 x 140 x 33 mm (d x D x B) per ISO 15.
What they share are the ISO 15 boundary dimensions, not the specs: seals or shields, internal clearance, cage and load rating may vary with brand and suffix. Every quote is by full part number.
Frequently asked questions
- SKF 6313/VA201 bearing: what are its dimensions?
- SKF 6313/VA201 measures 65 mm across the bore and 140 mm across the outside diameter; its width is 33 mm (65 x 140 x 33 mm). Those are the boundary dimensions standardized in ISO 15 for basic designation 6313.
- What does the VA201 suffix mean on an SKF bearing?
- VA201 is not a size code. It identifies a special execution with a steel sheet cage and a high-temperature lubricant, intended for bearings that must withstand heat without losing their properties.
- Can I use a VA201 bearing at room temperature?
- It will work, but it is not the most efficient choice. VA201 is optimized for high temperature; at room temperature a standard bearing is usually better. If your equipment runs across a wide range, contact us and we will review the best option.
- How do I request a quote for an SKF VA201 bearing?
- Send the full code on WhatsApp, for example 6204/VA201, with the quantity. MR Industrial Accessories will reply with the quote and alternatives, and can help you identify the correct code if needed.