SKF 6310 M/C4HVA3091 deep groove ball bearing
- Brand
- SKF
- Category
- Bearings
- Subcategory
- Deep groove ball bearings
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Decoding SKF 6310 M/C4HVA3091
- 63Series
- Deep groove ball bearings, 63 series. Series differ in outside diameter and width even when the bore is the same.
- 10Bore
- Bore 50 mm (10 × 5).
- M/C4HVA3091Suffix
- SKF suffix: identifies the variant, such as seals or shields, cage, internal clearance or other features.
6310 is the standard ISO basic designation, which sets the bearing type, series and bore.
Description
SKF 6310 M/C4HVA3091 measures 50 mm across the bore and 110 mm across the outside diameter; its width is 27 mm (50 x 110 x 27 mm).
SKF 6310 M/C4HVA3091 belongs to deep groove ball bearing, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 6310 M/C4HVA3091 and any equivalents.
The SKF deep groove ball bearing is a single-row, steel-cage component built to carry radial and axial loads in industrial machinery. It runs smoothly at high speeds and is common in electric motors, pumps, fans and general equipment. MR Industrial Accessories LLC supplies this bearing to customers across the United States and in several Latin American countries.
The part number tells you what you are getting. In 6310 M/C4HVA3091, the digits 6310 set the size and dimension series. The M stands for a machined brass cage, which suits high speeds and temperatures. C4 means radial internal clearance above standard, and HVA indicates a special stabilization and lubrication treatment for demanding conditions. Reading these codes correctly helps you match the bearing to the application.
These bearings appear in electric motors for pumps and compressors, industrial fans, machine tools and power transmission equipment. They also serve the food, chemical and petrochemical industries, where dependable operation matters. Because they handle combined loads, they fit many production processes.
Selection depends on load, speed and the environment. Seals or shields keep contamination out, and the internal radial clearance must match the operating temperature. Correct lubrication and precise alignment during mounting help extend service life. If you need technical guidance, our team can assist.
Cross-brand equivalents exist, but tolerances and radial clearance can differ between manufacturers. Where possible, replace with a bearing of the same or higher specifications. Interchangeability depends on dimensions and load capacity, not only on the code. Contact us if you are unsure about compatibility.
For an accurate quote, send the complete part number via WhatsApp or email. Our team replies promptly and can suggest equivalents or help you choose the right bearing.
More SKF versions in the 6310 series
SKF lists these 6310 series versions in its catalogs, but they don't have a page on this site. Send us the part number of any of them and we'll find it and quote it.
- SKF 6310 N
Dimensions
50 x 110 x 27 mm (d x D x B): boundary dimensions for basic designation 6310, according to ISO 15.
- Bore
- 50mm
- Outside diameter (D)
- 110mm
- Width (B)
- 27mm
Same size, other brands
Other brands' pages with basic designation 6310: 50 x 110 x 27 mm (d x D x B) per ISO 15.
What they share are the ISO 15 boundary dimensions, not the specs: seals or shields, internal clearance, cage and load rating may vary with brand and suffix. Every quote is by full part number.
Frequently asked questions
- SKF 6310 M/C4HVA3091 bearing: what are its dimensions?
- SKF 6310 M/C4HVA3091 measures 50 mm across the bore and 110 mm across the outside diameter; its width is 27 mm (50 x 110 x 27 mm). Those are the boundary dimensions standardized in ISO 15 for basic designation 6310.
- What does the C4 suffix mean in the designation?
- C4 indicates radial internal clearance greater than standard. It is used where operating temperatures are high or where more tolerance is needed to compensate for thermal expansion. Check that the clearance suits your equipment.
- Does this bearing come with seals or shields?
- The designation does not specify seals or shields. For contaminated environments, ask about variants with seals or shields. Our team can advise on the best option for your working conditions.
- How do I know if this bearing is compatible with my machine?
- Verify the main dimensions, load type and operating speed. The complete part number of the original bearing is the best reference. Send it to us via WhatsApp or email and we can help you find the right replacement.