SKF 6305-2RS2/C3HS0VT486 deep groove ball bearing
- Brand
- SKF
- Category
- Bearings
- Subcategory
- Deep groove ball bearings
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Decoding SKF 6305-2RS2/C3HS0VT486
- 63Series
- Deep groove ball bearings, 63 series. Series differ in outside diameter and width even when the bore is the same.
- 05Bore
- Bore 25 mm (05 × 5).
- 2RS2/C3HS0VT486Suffix
- SKF suffix: identifies the variant, such as seals or shields, cage, internal clearance or other features.
6305 is the standard ISO basic designation, which sets the bearing type, series and bore.
Description
SKF 6305-2RS2/C3HS0VT486 measures 25 mm across the bore and 62 mm across the outside diameter; its width is 17 mm (25 x 62 x 17 mm).
SKF 6305-2RS2/C3HS0VT486 belongs to deep groove ball bearing, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 6305-2RS2/C3HS0VT486 and any equivalents.
This SKF deep groove ball bearing is designed for rotating shafts that carry moderate radial and axial loads. Its sealed, lifetime-lubricated construction suits dusty or damp environments. MR Industrial Accessories LLC supplies this SKF bearing to customers across the United States and Latin America.
The part number 6305-2RS2/C3HS0VT486 breaks down into several segments. The basic designation 6305 defines the size and dimension series. The 2RS2 suffix denotes a double rubber contact seal. C3 indicates internal radial clearance greater than standard. HS0 refers to a special heat treatment, and VT486 identifies a high-performance grease. Reading these codes helps you confirm the bearing's features at a glance.
Typical applications include electric motors, pumps, fans, conveyors, and agricultural machinery. In food, chemical, and metallurgical plants, the contact seal provides essential protection against contaminants. The bearing handles high speeds and requires minimal maintenance, making it a versatile choice for many industrial settings.
When choosing a sealed bearing, match the seal type to the operating environment: contact seals for maximum protection or non-contact seals for lower friction. C3 clearance is advisable when temperature differences exist between shaft and housing. During installation, ensure precise alignment and avoid impacts that could damage the seals. Lifetime lubrication means no regreasing is needed in most cases.
SKF bearings can be interchanged with equivalent products from other recognized brands if the main dimensions, seal type, and clearance match. Always compare the complete code, not just the basic number, to ensure equivalent performance. Our technical team can assist with cross-referencing if you are unsure.
To request a quote for this SKF bearing, send the full code to MR Industrial Accessories LLC via WhatsApp or email. We will confirm the exact reference and suggest alternatives if needed.
More SKF versions in the 6305 series
SKF lists these 6305 series versions in its catalogs, but they don't have a page on this site. Send us the part number of any of them and we'll find it and quote it.
- SKF 6305 ETN9
- SKF 6305 N
Dimensions
25 x 62 x 17 mm (d x D x B): boundary dimensions for basic designation 6305, according to ISO 15.
- Bore
- 25mm
- Outside diameter (D)
- 62mm
- Width (B)
- 17mm
Same size, other brands
Other brands' pages with basic designation 6305: 25 x 62 x 17 mm (d x D x B) per ISO 15.
What they share are the ISO 15 boundary dimensions, not the specs: seals or shields, internal clearance, cage and load rating may vary with brand and suffix. Every quote is by full part number.
Frequently asked questions
- SKF 6305-2RS2/C3HS0VT486 bearing: what are its dimensions?
- SKF 6305-2RS2/C3HS0VT486 measures 25 mm across the bore and 62 mm across the outside diameter; its width is 17 mm (25 x 62 x 17 mm). Those are the boundary dimensions standardized in ISO 15 for basic designation 6305.
- What does the C3 suffix mean on this bearing?
- C3 indicates greater internal radial clearance than standard. It compensates for thermal expansion and interference fits that reduce clearance, helping the bearing run smoothly at elevated temperatures.
- Does this bearing come lubricated from the factory?
- Yes, bearings with the 2RS2 seal and suffixes such as VT486 are typically lifetime-lubricated with a special grease. Under normal conditions, no regreasing is required. For severe environments, consult the technical specifications.
- Can I replace an SKF bearing with another brand?
- Yes, provided the main dimensions, seal type, and clearance are equivalent. Verify the complete code, not just the basic number. If unsure, send us the original code and we will help you find the equivalent.