SKF 629-2RSH deep groove ball bearing

SKF 629-2RSH belongs to deep groove ball bearing, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 629-2RSH and any equivalents.

Single-row deep groove ball bearings from SKF that carry moderate radial and axial loads in either direction. The RSH feature is an elastomer seal fitted to one side; it keeps lubricant in and contaminants out. Typical installations include electric motors, fans, pumps, portable power tools and general industrial machinery.

Reading the code tells you which version you have. The base number sets the size and series, and the suffix shows the sealing arrangement: in 607-2RSH the 607 is the size reference while 2RSH means both sides are sealed; in 608-RSH the RSH suffix means only one side carries a seal. The same logic applies across 609-2RSH, 626-2RSH, 627-2RSH and 629-2RSH, where the leading digits fix the dimensions and the suffix fixes the protection.

Where do these bearings fit? Low and medium power electric motors, fans, centrifugal pumps, compressors, machine tools and transmission equipment are common hosts, along with appliances, refrigeration units and light conveying systems. Their compact envelope and moderate-speed capability suit food, textile, automotive and metalworking plants as well as maintenance shops.

Selection comes down to three things: the radial and axial load, the running speed and the surrounding conditions. Choose RSH sealing where dust, moisture or splashing liquids are present; in a clean environment where lower friction matters, an open or shielded version may serve better. During mounting, confirm that shaft and housing are aligned and avoid impacts that could deform the seals. The bearing arrives pre-lubricated, so leave the grease as supplied unless the manufacturer states otherwise, and aim for moderate interference on the inner or outer ring so the fit seats correctly.

Replacing a bearing from a different maker is often straightforward: the base number plus the sealing type usually match across brands. A 2RS part from another supplier may line up with an SKF 2RSH, but verify tolerances and clearance before committing. MR Industrial Accessories LLC supplies SKF bearings and can advise on interchangeability; send the full code, or the shaft and housing dimensions, and we will point you to the compatible option.

To get a quote, message us on WhatsApp or by email with the exact code printed on the bearing, or the dimensions you need. If the designation is unclear, a photo or the equipment data is enough for us to help identify the correct replacement. We serve customers throughout the United States and in several Latin American countries.