SKF 625-2RS1/C3MLHT23 deep groove ball bearing
- Brand
- SKF
- Category
- Bearings
- Subcategory
- Deep groove ball bearings
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Decoding SKF 625-2RS1/C3MLHT23
- 62Series
- Deep groove ball bearings, 62 series. Series differ in outside diameter and width even when the bore is the same.
- 5Bore
- Bore: 5 mm.
- 2RS1/C3MLHT23Suffix
- SKF suffix: identifies the variant, such as seals or shields, cage, internal clearance or other features.
625 is the standard ISO basic designation, which sets the bearing type, series and bore.
Description
SKF 625-2RS1/C3MLHT23 measures 5 mm across the bore and 16 mm across the outside diameter; its width is 5 mm (5 x 16 x 5 mm).
SKF 625-2RS1/C3MLHT23 belongs to deep groove ball bearing, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 625-2RS1/C3MLHT23 and any equivalents.
For maintenance and purchasing teams, specifying the right bearing starts with reading its code. The SKF deep groove ball bearing shown here carries the designation 625-2RS1/C3MLHT23, a single-row bearing with seals and special clearance. MR Industrial Accessories LLC supplies this SKF bearing to plants across the United States and Latin America. To request a quote, send the full part number by WhatsApp or email; our team responds quickly and can help you confirm the correct item.
The part number breaks down into several elements. The numeric prefix 625 defines the size. The 2RS1 suffix means rubber seals on both sides. C3 indicates internal radial clearance greater than standard. MLHT identifies a special high-temperature lubricant. Reading the code this way helps you verify that a replacement matches the original specification before installation.
These bearings are commonly found in electric motors, pumps, fans, conveyors and agricultural machinery. Their deep raceways allow them to support radial and axial loads while running at high speeds. When selecting a bearing, consider the operating temperature, the presence of contaminants and the load type. The 2RS1 seal keeps out dust and moisture, while C3 clearance compensates for thermal expansion.
During assembly, check shaft and housing alignment and apply the proper fitting force. Avoid striking the bearing directly and use the correct tools. MLHT lubrication is formulated for high temperatures, but continue to monitor the relubrication interval where applicable. In corrosive environments, evaluate additional sealing. Careful installation helps reduce vibration and supports service life.
Deep groove ball bearings can be interchanged between manufacturers when dimensions and suffixes match. An SKF code may have an equivalent in another brand, but always verify tolerances and clearance. Suffixes are not universal; for example, 2RS1 may correspond to 2RS elsewhere. Our team can help you find a suitable equivalent without risks.
Dimensions
5 x 16 x 5 mm (d x D x B): boundary dimensions for basic designation 625, according to ISO 15.
- Bore
- 5mm
- Outside diameter (D)
- 16mm
- Width (B)
- 5mm
Same size, other brands
Other brands' pages with basic designation 625: 5 x 16 x 5 mm (d x D x B) per ISO 15.
What they share are the ISO 15 boundary dimensions, not the specs: seals or shields, internal clearance, cage and load rating may vary with brand and suffix. Every quote is by full part number.
Frequently asked questions
- SKF 625-2RS1/C3MLHT23 bearing: what are its dimensions?
- SKF 625-2RS1/C3MLHT23 measures 5 mm across the bore and 16 mm across the outside diameter; its width is 5 mm (5 x 16 x 5 mm). Those are the boundary dimensions standardized in ISO 15 for basic designation 625.
- What does the C3 suffix mean on this bearing?
- C3 indicates greater internal radial clearance than standard. It is used when thermal expansion due to high temperatures or interference fits could otherwise preload the bearing and cause premature failure.
- Does this bearing come with seals on both sides?
- Yes, the 2RS1 suffix indicates rubber seals on both sides, which protect against dust, moisture and lubricant loss. It is suitable for contaminated environments, although not for immersion.
- Can I replace an SKF bearing with another brand?
- Yes, if dimensions, clearance and seal type match. Verify the suffixes, because they may vary between manufacturers. At MR we help you find the correct equivalent for your equipment.