SKF 6215/P6 deep groove ball bearing
- Brand
- SKF
- Category
- Bearings
- Subcategory
- Deep groove ball bearings
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Decoding SKF 6215/P6
- 62Series
- Deep groove ball bearings, 62 series. Series differ in outside diameter and width even when the bore is the same.
- 15Bore
- Bore 75 mm (15 × 5).
- P6Suffix
- SKF suffix: identifies the variant, such as seals or shields, cage, internal clearance or other features.
6215 is the standard ISO basic designation, which sets the bearing type, series and bore.
Description
SKF 6215/P6 measures 75 mm across the bore and 130 mm across the outside diameter; its width is 25 mm (75 x 130 x 25 mm).
SKF 6215/P6 belongs to deep groove ball bearing, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 6215/P6 and any equivalents.
A deep groove ball bearing from the SKF 62 series carries radial and axial loads in rotating equipment, using a single row of balls running in deep raceway grooves. That layout supports high rotational speeds with limited maintenance attention. Electric motors, pumps, fans and general industrial machinery are the usual homes for these bearings. MR Industrial Accessories LLC supplies this brand and can guide you toward the correct part number for the job.
The 62 series identifies a medium-section family of deep groove ball bearings. When a part number carries the /P6 suffix, it points to a dimensional and running accuracy class defined by standard, held to tighter tolerances than the standard class. So 6215/P6 pairs size 15 of the 62 series with that precision class. A part number without a suffix is the standard execution.
Typical installations include electric motors, centrifugal pumps, fans, compressors, conveyor belts and machine tools. Plants in the food, petrochemical, textile and agro-industrial sectors rely on them as well. Because they handle combined loads and run at high speed, they suit equipment that operates continuously. The 62 series is among the most widely used, thanks to its balance of size and performance.
Selection starts with the radial and axial load, the rotational speed and the operating environment. Then check the sealing arrangement: open, shielded or sealed, depending on dust, moisture or splashing. Internal clearance and lubrication should match the working temperature. At mounting, keep shaft and housing aligned and avoid impacts that mark the raceways. Correct lubrication is what carries service life.
Dimensional equivalences exist across brands for 62 series deep groove ball bearings, which simplifies interchange. Before fitting a replacement, confirm that bore, outer diameter and width match, and that the precision class is the same or higher. Suffixes differ from one manufacturer to another, while the basic series part number generally stays the same.
More SKF versions in the 6215 series
SKF lists these 6215 series versions in its catalogs, but they don't have a page on this site. Send us the part number of any of them and we'll find it and quote it.
- SKF 6215 N
Dimensions
75 x 130 x 25 mm (d x D x B): boundary dimensions for basic designation 6215, according to ISO 15.
- Bore
- 75mm
- Outside diameter (D)
- 130mm
- Width (B)
- 25mm
Same size, other brands
Other brands' pages with basic designation 6215: 75 x 130 x 25 mm (d x D x B) per ISO 15.
What they share are the ISO 15 boundary dimensions, not the specs: seals or shields, internal clearance, cage and load rating may vary with brand and suffix. Every quote is by full part number.
Frequently asked questions
- SKF 6215/P6 bearing: what are its dimensions?
- SKF 6215/P6 measures 75 mm across the bore and 130 mm across the outside diameter; its width is 25 mm (75 x 130 x 25 mm). Those are the boundary dimensions standardized in ISO 15 for basic designation 6215.
- What does the /P6 suffix mean on an SKF bearing?
- It identifies a precision class per standard, with dimensional and running tolerances tighter than the standard class. Applications needing greater accuracy, such as machine tool spindles or high-speed equipment, are where it is specified.
- How do I know if a bearing from another brand replaces the SKF 6215/P6?
- Compare bore diameter, outer diameter and width, and confirm the precision class is equivalent or higher. Suffixes can change between manufacturers, but the basic series part number usually matches.
- What type of lubrication does this bearing use?
- It depends on speed, load and temperature, and can be grease or oil. Lithium or synthetic grease covers most industrial applications. Follow the equipment manufacturer's recommendations and ask us if anything is unclear.