SKF 6214 M/C3S0VQ335 deep groove ball bearing
- Brand
- SKF
- Category
- Bearings
- Subcategory
- Deep groove ball bearings
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Decoding SKF 6214 M/C3S0VQ335
- 62Series
- Deep groove ball bearings, 62 series. Series differ in outside diameter and width even when the bore is the same.
- 14Bore
- Bore 70 mm (14 × 5).
- M/C3S0VQ335Suffix
- SKF suffix: identifies the variant, such as seals or shields, cage, internal clearance or other features.
6214 is the standard ISO basic designation, which sets the bearing type, series and bore.
Description
SKF 6214 M/C3S0VQ335 measures 70 mm across the bore and 125 mm across the outside diameter; its width is 24 mm (70 x 125 x 24 mm).
SKF 6214 M/C3S0VQ335 belongs to deep groove ball bearing, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 6214 M/C3S0VQ335 and any equivalents.
SKF deep groove ball bearings carry radial and axial loads in rotating equipment. Their single-row ball design with deep raceways supports high-speed operation and long service intervals. You will find them in electric motors, pumps, fans and gearboxes. MR Industrial Accessories supplies these bearings to industrial buyers across the United States and Latin America.
The part number tells you what you are getting once you know how to read it. Take 6214 M/C3S0VQ335. The first two digits, 62, mean the medium section series; 63 indicates the wider section series. The next two digits, 14 or 15, give the bore in millimeters. Then the suffixes: M for a machined brass cage, C3 for radial internal clearance above standard, S0 for heat treatment that keeps dimensions stable up to 150 °C, and VQ335 for a specific quality and lubrication spec. Reading the code correctly is the first step in matching a bearing to the application.
These bearings show up in general-purpose electric motors, centrifugal pumps, industrial fans, conveyor belts and speed reducers. Food processing, textile, metallurgical and petrochemical plants also rely on them. Because they handle combined loads and run at high speeds, they suit continuous processes where uptime matters. As SKF products, they deliver consistent performance across these duties.
When you select a deep groove ball bearing, look at radial and axial load, rotation speed and the surrounding environment. Choose C3 clearance when thermal gradients are significant, since it compensates for expansion. The M machined brass cage adds strength in severe applications. Make sure shaft and housing alignment is precise, and apply lubrication that matches the operating regime. For sealing, consider contamination: in dirty environments, pick bearings with extra seals or shields.
During replacement, you often find equivalents across brands. Each maker uses its own designation system, but bore, outer diameter and width usually follow international standards. To interchange safely, confirm that the other code carries the same internal clearance, cage type and heat treatment. Not every combination is equivalent, so check with a specialist before substituting a critical component.
To request a quote for an SKF deep groove ball bearing, send the complete part number by WhatsApp or email to MR Industrial Accessories. Our technical team will help you identify the correct designation and answer questions about applications, mounting or interchangeability. We are here to advise you and supply the components your industry needs.
More SKF versions in the 6214 series
SKF lists these 6214 series versions in its catalogs, but they don't have a page on this site. Send us the part number of any of them and we'll find it and quote it.
- SKF 6214 N
Dimensions
70 x 125 x 24 mm (d x D x B): boundary dimensions for basic designation 6214, according to ISO 15.
- Bore
- 70mm
- Outside diameter (D)
- 125mm
- Width (B)
- 24mm
Same size, other brands
Other brands' pages with basic designation 6214: 70 x 125 x 24 mm (d x D x B) per ISO 15.
What they share are the ISO 15 boundary dimensions, not the specs: seals or shields, internal clearance, cage and load rating may vary with brand and suffix. Every quote is by full part number.
Frequently asked questions
- SKF 6214 M/C3S0VQ335 bearing: what are its dimensions?
- SKF 6214 M/C3S0VQ335 measures 70 mm across the bore and 125 mm across the outside diameter; its width is 24 mm (70 x 125 x 24 mm). Those are the boundary dimensions standardized in ISO 15 for basic designation 6214.
- What does the C3 suffix mean in an SKF bearing?
- C3 means the bearing has radial internal clearance greater than standard. It is used when operating conditions cause thermal expansion, such as in electric motors or high-temperature applications, to prevent the clearance from becoming too small.
- How do I identify the bore diameter in the designation 6214?
- In 6214, the first two digits (62) indicate the medium section series. The last two (14) correspond to the bore diameter in millimeters: 14 mm. For diameters under 20 mm, the coding may vary, but here it is direct.
- Can I replace an SKF bearing with another brand?
- Yes, as long as the main dimensions and internal specifications match. Verify that the replacement has the same internal clearance, cage type and heat treatment. Consult us with the original part number and we will advise you on the appropriate equivalent.