SKF 6212 JV deep groove ball bearing
- Brand
- SKF
- Category
- Bearings
- Subcategory
- Deep groove ball bearings
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Decoding SKF 6212 JV
- 62Series
- Deep groove ball bearings, 62 series. Series differ in outside diameter and width even when the bore is the same.
- 12Bore
- Bore 60 mm (12 × 5).
- JVSuffix
- SKF suffix: identifies the variant, such as seals or shields, cage, internal clearance or other features.
6212 is the standard ISO basic designation, which sets the bearing type, series and bore.
Description
SKF 6212 JV measures 60 mm across the bore and 110 mm across the outside diameter; its width is 22 mm (60 x 110 x 22 mm).
SKF 6212 JV belongs to deep groove ball bearing, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 6212 JV and any equivalents.
A single row deep groove ball bearing from the SKF JV series handles moderate radial and axial loads in both directions. Its stamped steel cage suits equipment where speed and precision are important, such as electric motors, pumps and fans. MR Industrial Accessories supplies this series and can help you confirm the right suffix for your application.
The JV suffix tells you the bearing uses a stamped steel cage and standard internal clearance. The base number before it covers size and dimensional series. Take 6212 JV: 62 indicates a medium section, and JV is the cage. The suffix leaves the main dimensions unchanged, but it does affect how the bearing behaves at speed and under temperature. If the full part number is unclear, send it over and we will check it.
You will find these bearings in electric motors, centrifugal pumps, fans, gearboxes and machine tools. The 62 series offers a middle ground between load capacity and permissible speed because of its medium section. Since they are standard production, replacements are straightforward to source and install during planned shutdowns.
When selecting a bearing, look at radial and axial load, rotation speed and the surrounding environment. Sealing options include open, shielded or sealed designs. Internal clearance needs to match the working temperature. Proper lubrication and correct shaft and housing alignment help extend service life. During assembly, avoid striking the cage and use the right extraction tools so the raceways stay undamaged.
Deep groove ball bearings from different brands can be interchangeable when dimensions, clearance and cage type line up. SKF, FAG, NSK and NTN each use their own nomenclature, but the main dimensions are often compatible. To replace a bearing, send us the old part number and we will locate the equivalent.
For a quote on the SKF JV series deep groove ball bearing or to ask about a specific size, message us on WhatsApp. MR Industrial Accessories replies with the technical details you need to choose correctly, and we can suggest equivalents and help with selection.
More SKF versions in the 6212 series
SKF lists these 6212 series versions in its catalogs, but they don't have a page on this site. Send us the part number of any of them and we'll find it and quote it.
- SKF 6212 N
Dimensions
60 x 110 x 22 mm (d x D x B): boundary dimensions for basic designation 6212, according to ISO 15.
- Bore
- 60mm
- Outside diameter (D)
- 110mm
- Width (B)
- 22mm
Same size, other brands
Other brands' pages with basic designation 6212: 60 x 110 x 22 mm (d x D x B) per ISO 15.
What they share are the ISO 15 boundary dimensions, not the specs: seals or shields, internal clearance, cage and load rating may vary with brand and suffix. Every quote is by full part number.
Frequently asked questions
- SKF 6212 JV bearing: what are its dimensions?
- SKF 6212 JV measures 60 mm across the bore and 110 mm across the outside diameter; its width is 22 mm (60 x 110 x 22 mm). Those are the boundary dimensions standardized in ISO 15 for basic designation 6212.
- What does the JV suffix mean on an SKF bearing?
- It means the bearing has a stamped steel cage and standard internal clearance. Main dimensions stay the same, but speed and working temperature can be affected. Verify the full part number before replacing.
- How do I know if an SKF JV series bearing fits my equipment?
- Check bore, outer diameter and width. Also confirm cage type and internal clearance. If you have the original part number, send it to us and we will help you find the right equivalent.
- What care should I take when mounting a deep groove ball bearing?
- Do not hit the cage, and apply force only on the ring you are fitting. Check shaft and housing alignment, lubricate to specification, and use suitable tools to avoid damaging the raceways.