SKF 6212-2Z/C4HVT376 deep groove ball bearing
- Brand
- SKF
- Category
- Bearings
- Subcategory
- Deep groove ball bearings
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Decoding SKF 6212-2Z/C4HVT376
- 62Series
- Deep groove ball bearings, 62 series. Series differ in outside diameter and width even when the bore is the same.
- 12Bore
- Bore 60 mm (12 × 5).
- 2Z/C4HVT376Suffix
- SKF suffix: identifies the variant, such as seals or shields, cage, internal clearance or other features.
6212 is the standard ISO basic designation, which sets the bearing type, series and bore.
Description
SKF 6212-2Z/C4HVT376 measures 60 mm across the bore and 110 mm across the outside diameter; its width is 22 mm (60 x 110 x 22 mm).
SKF 6212-2Z/C4HVT376 belongs to deep groove ball bearing, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 6212-2Z/C4HVT376 and any equivalents.
SKF deep groove ball bearings handle radial and axial loads in rotating equipment. Their single-row design with deep raceways supports high-speed operation with minimal maintenance. MR Industrial Accessories supplies this brand and helps you find the right code for your application.
The part number tells you what you are getting. In 6000-Z/C3HVT183, 6000 is the extra-light series, Z means a metal shield on one side, C3 sets internal radial clearance above standard, and HVT183 indicates a variant with special heat treatment and high-temperature lubrication. In 6212-2Z/C4HVT376, 6212 is the medium series, 2Z means shields on both sides, C4 is even greater clearance, and HVT376 is a version built for severe conditions. Reading these codes correctly is essential when ordering a replacement.
These bearings appear in electric motors, centrifugal pumps, fans, conveyors, machine tools and gearboxes. They take combined loads and run at high speeds, which suits precision-driven applications in food processing, chemical, petrochemical and manufacturing plants.
Selection depends on load, speed, operating temperature and environment. Metal shields (Z, 2Z) work well in dry conditions; rubber seals (RS, 2RS) handle moisture and dust. Internal clearance (C3, C4) compensates for thermal expansion. Lubrication must match the temperature, and HVT variants typically include high-performance greases. During mounting, check alignment and avoid impacts that can damage the raceways.
Interchangeability exists between brands: an SKF 6205 can cross to codes from FAG, NSK or NTN that follow the same dimensional designation. Tolerances and clearances may differ, so verify technical specifications before substituting. MR Industrial Accessories supplies SKF and can advise on interchangeability without compromising your equipment.
To request a quote, send the full code on WhatsApp or by email. The team responds promptly and can suggest equivalents or help you choose the right bearing.
More SKF versions in the 6212 series
SKF lists these 6212 series versions in its catalogs, but they don't have a page on this site. Send us the part number of any of them and we'll find it and quote it.
- SKF 6212 N
Dimensions
60 x 110 x 22 mm (d x D x B): boundary dimensions for basic designation 6212, according to ISO 15.
- Bore
- 60mm
- Outside diameter (D)
- 110mm
- Width (B)
- 22mm
Same size, other brands
Other brands' pages with basic designation 6212: 60 x 110 x 22 mm (d x D x B) per ISO 15.
What they share are the ISO 15 boundary dimensions, not the specs: seals or shields, internal clearance, cage and load rating may vary with brand and suffix. Every quote is by full part number.
Frequently asked questions
- SKF 6212-2Z/C4HVT376 bearing: what are its dimensions?
- SKF 6212-2Z/C4HVT376 measures 60 mm across the bore and 110 mm across the outside diameter; its width is 22 mm (60 x 110 x 22 mm). Those are the boundary dimensions standardized in ISO 15 for basic designation 6212.
- What does the HVT suffix mean on an SKF bearing?
- HVT indicates a variant with special heat treatment and lubrication for high temperatures. These bearings are designed to withstand extreme heat while maintaining performance in demanding industrial applications.
- Can I replace an SKF bearing with another brand?
- Yes, dimensional equivalences exist between brands, but you must verify tolerances, clearance and lubrication. A similar code may not meet the same specifications. Consult us with the original code and we will advise on the best option.
- How do I choose between Z shield and RS seal?
- The Z metal shield protects against large particles and suits dry environments. The RS rubber seal offers better protection against moisture and fine dust. The choice depends on your application conditions; if you have doubts, consult us.