SKF 6210-2RS1/GJN deep groove ball bearing
- Brand
- SKF
- Category
- Bearings
- Subcategory
- Deep groove ball bearings
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Decoding SKF 6210-2RS1/GJN
- 62Series
- Deep groove ball bearings, 62 series. Series differ in outside diameter and width even when the bore is the same.
- 10Bore
- Bore 50 mm (10 × 5).
- 2RS1/GJNSuffix
- SKF suffix: identifies the variant, such as seals or shields, cage, internal clearance or other features.
6210 is the standard ISO basic designation, which sets the bearing type, series and bore.
Description
SKF 6210-2RS1/GJN measures 50 mm across the bore and 90 mm across the outside diameter; its width is 20 mm (50 x 90 x 20 mm).
SKF 6210-2RS1/GJN belongs to deep groove ball bearing, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 6210-2RS1/GJN and any equivalents.
This SKF deep groove ball bearing in the 2RS1/GJN version is a medium-section unit that arrives sealed on both sides and pre-lubricated with a high-grade grease. It handles moderate radial and axial loads in equipment where contamination resistance and low maintenance matter. Common uses include power transmission, electric motors, pumps and fans.
Reading the code helps you match the right part. The initial digits give the size and series, such as 6007, 6206 or 6309. The 2RS1 suffix tells you there are rubber seals on both sides, keeping grease in and keeping dust and moisture out. The GJN suffix identifies the factory fill of high-temperature polyurea grease. So a 6206-2RS1/GJN is a 62-series bearing, double-sealed and greased for extended service.
You will find these bearings in electric motors, centrifugal pumps, fans, compressors, conveyor belts and machine tools. The double sealing suits dusty, damp or splash-prone settings like food plants, industrial laundries and workshops. They also appear in agricultural and road equipment, where keeping contaminants out is key to avoiding downtime.
When selecting a bearing, consider radial and axial load, rotation speed and shaft diameter. Because the 2RS1 seal comes with the needed lubrication, no additional greasing is required. During mounting, check alignment between shaft and housing and avoid striking the seals. If the equipment runs at high temperatures, confirm that the GJN grease suits the operating range.
SKF deep groove ball bearings interchange with other brands that share the same standardized dimensions. For a replacement, compare the full designation: series number plus sealing and lubrication suffixes. Do not swap a sealed bearing for an open one without assessing the contamination level of the environment. Our team can advise you so you pick the right option.
If you already have the part number, send it by WhatsApp or email for a quote. If you do not, share the shaft and housing measurements or a photo of the part and we will help identify the replacement. We know these applications and can suggest equivalents to keep your equipment running.
Dimensions
50 x 90 x 20 mm (d x D x B): boundary dimensions for basic designation 6210, according to ISO 15.
- Bore
- 50mm
- Outside diameter (D)
- 90mm
- Width (B)
- 20mm
Same size, other brands
Other brands' pages with basic designation 6210: 50 x 90 x 20 mm (d x D x B) per ISO 15.
- FAG6210-C-2HRS6210-C6210-C-2Z
- KOYO62106210R
- NSK62106210 ZZ
- NTN6210LLB6210LLH6210LLU4 more →
- RKB6210
- TIMKEN6210
What they share are the ISO 15 boundary dimensions, not the specs: seals or shields, internal clearance, cage and load rating may vary with brand and suffix. Every quote is by full part number.
Frequently asked questions
- SKF 6210-2RS1/GJN bearing: what are its dimensions?
- SKF 6210-2RS1/GJN measures 50 mm across the bore and 90 mm across the outside diameter; its width is 20 mm (50 x 90 x 20 mm). Those are the boundary dimensions standardized in ISO 15 for basic designation 6210.
- What does the 2RS1 suffix mean on an SKF bearing?
- The 2RS1 suffix means the bearing has rubber seals on both sides. These seals retain grease and block contaminants, which helps in dirty or humid environments.
- Does this bearing come already lubricated?
- Yes, bearings with the GJN suffix are factory-lubricated with high-temperature polyurea grease. They need no additional greasing and are ready to mount.
- How do I request a quote for an SKF 2RS1/GJN bearing?
- Send the complete part number by WhatsApp or email. If you do not have it, send the shaft and housing measurements or a photo, and we will help you identify it.