SKF 6207-2RS1NR deep groove ball bearing
- Brand
- SKF
- Category
- Bearings
- Subcategory
- Deep groove ball bearings
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Decoding SKF 6207-2RS1NR
- 62Series
- Deep groove ball bearings, 62 series. Series differ in outside diameter and width even when the bore is the same.
- 07Bore
- Bore 35 mm (07 × 5).
- 2RS1NRSuffix
- SKF suffix: identifies the variant, such as seals or shields, cage, internal clearance or other features.
6207 is the standard ISO basic designation, which sets the bearing type, series and bore.
Description
SKF 6207-2RS1NR measures 35 mm across the bore and 72 mm across the outside diameter; its width is 17 mm (35 x 72 x 17 mm).
SKF 6207-2RS1NR belongs to deep groove ball bearing, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 6207-2RS1NR and any equivalents.
Sealed deep groove ball bearings from SKF in the 60 and 62 series, supplied with 2RS1 seals on both sides and an NR retaining ring on the outer ring. They carry radial and axial loads in either direction, and the sealing and ring arrangement suits equipment where contamination and axial location both matter. MR Industrial Accessories LLC supplies this line within its bearing range for customers in the United States and Latin America.
Reading the code tells you what you are ordering. In 6006-2RS1NR, the 60 block is the extra light section series; in 6206-2RS1NR, the 62 block is the medium section series. The 2RS1 portion means rubber seals sit on both faces, keeping contaminants out and lubricant in. The NR portion means a retaining ring is fitted in a groove on the outer ring, so the bearing can be located axially in the housing without separate covers.
Typical duty covers electric motors, pumps, fans, conveyors and general transmission equipment in food, textile, metallurgical and agricultural plants. Dust, chips and liquid splash are handled by the seals, while the NR ring removes the need for extra locating hardware on shafts that need positive axial fixing.
For selection, work from the radial and axial load the position will see and from the running speed. Confirm the housing has the groove the NR ring needs, and that the shaft fits the recommended tolerances. Press on the ring, never on the seals, and check shaft-to-housing alignment during mounting. Factory lubricant is already in place and the seals hold it there; keep the bearing away from extreme temperatures.
Other makers use the same standardized designation for 2RS1 and NR versions, so interchange is often possible, but dimensions and load ratings can differ slightly. Match the full part number and check the technical data before substituting. We can review interchangeability with you.
Send the part number by WhatsApp or email to request a quote or ask about other sizes. We reply promptly and can suggest equivalents and help you choose.
More SKF versions in the 6207 series
SKF lists these 6207 series versions in its catalogs, but they don't have a page on this site. Send us the part number of any of them and we'll find it and quote it.
- SKF 6207 ETN9
- SKF 6207 N
Dimensions
35 x 72 x 17 mm (d x D x B): boundary dimensions for basic designation 6207, according to ISO 15.
- Bore
- 35mm
- Outside diameter (D)
- 72mm
- Width (B)
- 17mm
Same size, other brands
Other brands' pages with basic designation 6207: 35 x 72 x 17 mm (d x D x B) per ISO 15.
What they share are the ISO 15 boundary dimensions, not the specs: seals or shields, internal clearance, cage and load rating may vary with brand and suffix. Every quote is by full part number.
Frequently asked questions
- SKF 6207-2RS1NR bearing: what are its dimensions?
- SKF 6207-2RS1NR measures 35 mm across the bore and 72 mm across the outside diameter; its width is 17 mm (35 x 72 x 17 mm). Those are the boundary dimensions standardized in ISO 15 for basic designation 6207.
- What does the 2RS1 suffix mean on an SKF bearing?
- It means rubber seals are fitted on both sides. They block contaminants from entering and keep the lubricant where it belongs, which helps in dirty or damp environments.
- What is the NR retaining ring for?
- The NR ring is a spring ring seated in a groove on the outer ring. It holds the bearing axially in the housing, so covers or flanges are not needed for location.
- Can I replace an SKF 2RS1NR bearing with another brand?
- Often yes, if the standardized designation matches in dimensions and suffixes. Tolerances and load ratings can differ between makers, so verify before replacing. Send us the part number and we will advise.