SKF 6204-Z/C3VC4862 deep groove ball bearing
- Brand
- SKF
- Category
- Bearings
- Subcategory
- Deep groove ball bearings
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Decoding SKF 6204-Z/C3VC4862
- 62Series
- Deep groove ball bearings, 62 series. Series differ in outside diameter and width even when the bore is the same.
- 04Bore
- Bore 20 mm (04 × 5).
- Z/C3VC4862Suffix
- SKF suffix: identifies the variant, such as seals or shields, cage, internal clearance or other features.
6204 is the standard ISO basic designation, which sets the bearing type, series and bore.
Description
SKF 6204-Z/C3VC4862 measures 20 mm across the bore and 47 mm across the outside diameter; its width is 14 mm (20 x 47 x 14 mm).
SKF 6204-Z/C3VC4862 belongs to deep groove ball bearing, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 6204-Z/C3VC4862 and any equivalents.
A deep groove ball bearing from SKF's 62 series handles radial and axial forces in rotating equipment. The single row of balls running in deep raceways supports high speed operation with little upkeep. We supply this line with different shield and clearance configurations, so the bearing can be matched to the shaft fit, temperature and contamination level of the application.
Reading the part number is the first step in selection. The basic number identifies size and series: 6203, 6204 and 6205 all belong to the 62 series, a medium section used in general machinery. The letters and numbers that follow describe execution. Z marks a metal shield on one side; 2Z means shields on both sides. C3 denotes internal radial clearance above the standard value. VC indicates a special design variant whose content depends on the manufacturer. With these codes clear, you can confirm that the bearing on the bench matches the one in the manual.
These bearings appear in pumps, fans, conveyors, electric motors and agricultural equipment. They tolerate combined loads and run at high speeds, which explains their broad use. In food, chemical and textile operations, where lubricant cleanliness matters, a Z or 2Z shield keeps dust out and helps the grease stay in place. Moderate temperatures and dusty surroundings are also common working conditions for this series.
Selection depends on load, speed and the environment. Where dust or moisture is present, a 2Z or 2RS version is the practical choice. C3 clearance suits interference fits or cases where temperature differences across the assembly could otherwise close the internal gap. At mounting, keep the bearing aligned and avoid impacts that mark the raceways. Correct lubrication and sealing reduce noise and vibration and support longer service.
SKF deep groove ball bearings interchange with other brands that share the same standardized boundary dimensions. Suffix meanings, however, are not always identical from one maker to another: a C3 from SKF may correspond to a C3 elsewhere, but the technical data should be checked before substitution. We can review the equivalence for you and flag any difference that affects fit or clearance.
Send the part number of your SKF bearing by WhatsApp or email and the team will prepare a quote. We also help with selection and with finding a suitable equivalent when a direct replacement is not available.
More SKF versions in the 6204 series
SKF lists these 6204 series versions in its catalogs, but they don't have a page on this site. Send us the part number of any of them and we'll find it and quote it.
- SKF 6204 N
Dimensions
20 x 47 x 14 mm (d x D x B): boundary dimensions for basic designation 6204, according to ISO 15.
- Bore
- 20mm
- Outside diameter (D)
- 47mm
- Width (B)
- 14mm
Same size, other brands
Other brands' pages with basic designation 6204: 20 x 47 x 14 mm (d x D x B) per ISO 15.
What they share are the ISO 15 boundary dimensions, not the specs: seals or shields, internal clearance, cage and load rating may vary with brand and suffix. Every quote is by full part number.
Frequently asked questions
- SKF 6204-Z/C3VC4862 bearing: what are its dimensions?
- SKF 6204-Z/C3VC4862 measures 20 mm across the bore and 47 mm across the outside diameter; its width is 14 mm (20 x 47 x 14 mm). Those are the boundary dimensions standardized in ISO 15 for basic designation 6204.
- What does C3 mean on an SKF bearing?
- C3 identifies an internal radial clearance larger than the standard value. It is chosen when the bearing runs hot or when shaft or housing fits are interference fits, so that the clearance does not become too small in operation.
- How do Z and 2Z differ?
- Z means a metal shield on one side of the bearing. 2Z means shields on both sides. They block contaminants and retain lubricant, but they are not watertight the way rubber seals are.
- Is it possible to use another brand in place of an SKF bearing?
- Yes, if dimensions and design type match. Deep groove ball bearings follow international standards and interchange between brands. Check suffixes and tolerances, as these can differ, and ask us to confirm the equivalence.