SKF 6202-ZTN9/C3 deep groove ball bearing
- Brand
- SKF
- Category
- Bearings
- Subcategory
- Deep groove ball bearings
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Decoding SKF 6202-ZTN9/C3
- 62Series
- Deep groove ball bearings, 62 series. Series differ in outside diameter and width even when the bore is the same.
- 02Bore
- Bore 15 mm: by standard, 02 designates 15 mm.
- ZTN9/C3Suffix
- SKF suffix: identifies the variant, such as seals or shields, cage, internal clearance or other features.
6202 is the standard ISO basic designation, which sets the bearing type, series and bore.
Description
SKF 6202-ZTN9/C3 measures 15 mm across the bore and 35 mm across the outside diameter; its width is 11 mm (15 x 35 x 11 mm).
SKF 6202-ZTN9/C3 belongs to deep groove ball bearing, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 6202-ZTN9/C3 and any equivalents.
This SKF deep groove ball bearing handles radial and axial loads in rotating machinery. The single row of balls runs in deep raceways, which supports high-speed operation with minimal upkeep. The ZTN shields and C3 clearance make it a practical choice where dust or moderate heat is present. MR Industrial Accessories supplies this brand and can help you confirm the right bearing for your equipment.
Reading the part number helps you order the exact replacement. The main digits give the size and dimension series. The ZTN suffix means there are shields on both sides, a design that lowers friction and keeps lubricant in place. The C3 code, seen in 6202-ZTN9/C3, sets radial internal clearance above the standard level, which suits assemblies that see higher temperatures or interference fits. Understanding these suffixes is the key to getting the correct bearing.
You will find this bearing in electric motors, centrifugal pumps, fans, conveyors, machine tools and agricultural equipment. Its ability to carry combined loads at high speed makes it useful across many drives and continuous rotation systems in food, textile, chemical and metallurgical plants. The ZTN shields help retain lubrication where dust or moderate humidity is a concern.
When selecting, check the radial and axial load, the rotation speed and the operating environment. Choose C3 clearance if the bearing runs at temperatures that expand the material or if the shaft and housing fits are interference. Mount with suitable tools and avoid striking the balls or shields directly. Shaft and housing alignment must be correct to prevent extra loads. Use the lubricant specified by the manufacturer and renew it according to your maintenance plan.
Deep groove ball bearings with shields and C3 clearance from other brands can be interchangeable if dimensions and tolerances match. SKF is a worldwide reference, but always verify the complete part number and specifications before replacing. MR Industrial Accessories supplies SKF and can advise on interchangeability with other brands we carry.
If you need this bearing or want to confirm it fits your equipment, send the full part number on WhatsApp. MR Industrial Accessories replies with the technical information you need for a quote. We can also help you interpret the suffixes and pick the right internal clearance for your application. Write to us and we will assist you.
More SKF versions in the 6202 series
SKF lists these 6202 series versions in its catalogs, but they don't have a page on this site. Send us the part number of any of them and we'll find it and quote it.
- SKF 6202 N
Dimensions
15 x 35 x 11 mm (d x D x B): boundary dimensions for basic designation 6202, according to ISO 15.
- Bore
- 15mm
- Outside diameter (D)
- 35mm
- Width (B)
- 11mm
Same size, other brands
Other brands' pages with basic designation 6202: 15 x 35 x 11 mm (d x D x B) per ISO 15.
What they share are the ISO 15 boundary dimensions, not the specs: seals or shields, internal clearance, cage and load rating may vary with brand and suffix. Every quote is by full part number.
Frequently asked questions
- SKF 6202-ZTN9/C3 bearing: what are its dimensions?
- SKF 6202-ZTN9/C3 measures 15 mm across the bore and 35 mm across the outside diameter; its width is 11 mm (15 x 35 x 11 mm). Those are the boundary dimensions standardized in ISO 15 for basic designation 6202.
- What does the ZTN suffix mean on this SKF bearing?
- ZTN means the bearing has shields on both sides, a design that reduces friction and improves lubricant retention. It offers more protection than an open bearing, but it is not a full seal like a 2RS. Ask us on WhatsApp if you have questions.
- When should I use a bearing with C3 clearance?
- C3 clearance is advisable when the bearing works at high temperatures, because thermal expansion reduces internal clearance. It is also used in assemblies with interference fits on the shaft or housing. For standard applications, normal clearance may be enough. We advise you based on your case.
- How do I request a quote for this bearing?
- Send the full part number on WhatsApp, for example 6202-ZTN9/C3, and we will quote you shortly. If you are unsure of the part number, send a photo or the bearing measurements and we will help you identify it. MR Industrial Accessories supplies SKF and other brands.