SKF 6202-2RS2/C4VT127 deep groove ball bearing
- Brand
- SKF
- Category
- Bearings
- Subcategory
- Deep groove ball bearings
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Decoding SKF 6202-2RS2/C4VT127
- 62Series
- Deep groove ball bearings, 62 series. Series differ in outside diameter and width even when the bore is the same.
- 02Bore
- Bore 15 mm: by standard, 02 designates 15 mm.
- 2RS2/C4VT127Suffix
- SKF suffix: identifies the variant, such as seals or shields, cage, internal clearance or other features.
6202 is the standard ISO basic designation, which sets the bearing type, series and bore.
Description
SKF 6202-2RS2/C4VT127 measures 15 mm across the bore and 35 mm across the outside diameter; its width is 11 mm (15 x 35 x 11 mm).
SKF 6202-2RS2/C4VT127 belongs to deep groove ball bearing, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 6202-2RS2/C4VT127 and any equivalents.
The SKF deep groove ball bearing from series 62 is a medium-section component designed to handle moderate radial and axial loads. It is commonly found in electric motors, pumps, fans, and machine tools. Its construction supports high speeds and quiet running. MR Industrial Accessories supplies this brand and can help you select the right variant for your application.
The part number tells you a lot about the bearing. Take 6202-2RS2/C4VT127 or 6206-2RS1/C3VT486. The 62 prefix means medium-section series. The suffixes 2RS2 and 2RS1 indicate contact seals on both sides, which keep contaminants out and lubricant in. After the slash, C4 and C3 specify radial internal clearance, while VT127 and VT486 are special characteristics such as lubrication or treatment defined by the manufacturer. Reading these codes correctly is essential when ordering a replacement.
These bearings appear in food, chemical, petrochemical, and manufacturing plants. They are typical in electric motors for centrifugal pumps, industrial fans, conveyors, and machine tools. Because they accommodate combined loads and run at high speeds, they fit many roles. You will also find them in refrigeration equipment, compressors, and transmission systems. The medium section of series 62 balances load capacity and permissible speed.
When selecting a bearing, consider radial and axial loads, rotation speed, and environmental conditions. The 2RS seal suits dusty or humid areas because it prevents lubricant loss and contamination. Choose C3 or C4 internal clearance based on operating temperature and the fit on shaft and housing. During mounting, ensure proper alignment and avoid impacts that damage the raceways. Correct lubrication and tight sealing extend service life. Always consult the technical specifications for each application.
Equivalent bearings from other brands exist, but not all suffixes match. For example, a 2RS from one maker may differ slightly from another. Always verify the complete code and tolerances. MR Industrial Accessories supplies SKF products and can advise on interchangeability and source the exact reference you need.
If you have the bearing code, send it via WhatsApp or email to MR Industrial Accessories for a prompt quote. We can also help you identify the correct variant for your equipment. MR Industrial Accessories provides reliable solutions for your SKF bearings.
More SKF versions in the 6202 series
SKF lists these 6202 series versions in its catalogs, but they don't have a page on this site. Send us the part number of any of them and we'll find it and quote it.
- SKF 6202 N
Dimensions
15 x 35 x 11 mm (d x D x B): boundary dimensions for basic designation 6202, according to ISO 15.
- Bore
- 15mm
- Outside diameter (D)
- 35mm
- Width (B)
- 11mm
Same size, other brands
Other brands' pages with basic designation 6202: 15 x 35 x 11 mm (d x D x B) per ISO 15.
What they share are the ISO 15 boundary dimensions, not the specs: seals or shields, internal clearance, cage and load rating may vary with brand and suffix. Every quote is by full part number.
Frequently asked questions
- SKF 6202-2RS2/C4VT127 bearing: what are its dimensions?
- SKF 6202-2RS2/C4VT127 measures 15 mm across the bore and 35 mm across the outside diameter; its width is 11 mm (15 x 35 x 11 mm). Those are the boundary dimensions standardized in ISO 15 for basic designation 6202.
- What does the 2RS suffix mean on an SKF bearing?
- The 2RS suffix indicates contact seals on both sides. These seals protect against dust, water, and other contaminants, and retain the lubricant, extending bearing service life.
- What is the difference between C3 and C4 clearance?
- C3 radial internal clearance is greater than standard, and C4 is even greater. They are chosen when the bearing operates at high temperatures or with fits that reduce clearance, to prevent damage from running without clearance.
- Can I replace an SKF bearing with another brand?
- Yes, if dimensions and specifications match. Brands such as NSK, NTN, or FAG offer equivalents. But verify the suffixes, as they may vary. MR Industrial Accessories helps you find the right reference.