SKF 60X80X10 CRSHA1 R radial shaft seal
- Brand
- SKF
- Category
- Seals
- Subcategory
- Radial shaft seals
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
SKF 60X80X10 CRSHA1 R belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 60X80X10 CRSHA1 R and any equivalents.
The CRSHA R line from SKF covers radial shaft seals built for rotating shafts. Their job is to hold lubricant where it belongs and to keep dust, water and other contaminants out of the assembly. You will find them in gearboxes, pumps, electric motors and other industrial equipment where a reliable seal matters. MR Industrial Accessories supplies this line.
Reading the code is the first step. Take 60X80X10 CRSHA1 R: the bore is 60 mm, the outside diameter 80 mm and the width 10 mm. CRSHA points to the series, and the digit that follows it, as in CRSHA1, reflects a particular lip design and material. The trailing R marks a defined seal configuration, typically tied to the elastomer compound or the spring. Work from the published examples and the manufacturer's catalogs when you decode a reference.
These seals show up across many sectors. Speed reducers, centrifugal pumps, electric motors, compressors, machine tools and transmission equipment all rely on them, as do food, chemical and petrochemical plants where keeping lubricant in and contaminants out is a hard requirement. The radial layout suits shafts that turn at moderate to high speeds with proper lubrication.
Choosing a seal means weighing the housing and shaft dimensions, the lubricant in use, the working temperature and the peripheral speed. During installation, cleanliness is essential: inspect the shaft chamfer and use the right tools so the lip is not damaged. Shaft and housing must line up precisely, since misalignment speeds up wear. A film of lubricant on the lip before fitting helps the initial seal and supports service life.
On equivalences, radial shaft seals are traced by their main dimensions (bore, outside diameter and width) plus the lip type. SKF, NSK, Timken and NTN all list comparable items, yet sealing compounds and spring designs can differ from one maker to another. Confirm the full code and the operating conditions before swapping one brand for another. MR Industrial Accessories can advise on interchangeability.
Dimensions
Dimensions and tolerances: Message us the part number on WhatsApp and we'll verify its dimensions and version with the manufacturer's datasheet.
Frequently asked questions
- How do I identify the seal I need?
- Have the shaft and housing dimensions, the seal width and the complete code ready if you have it. That is enough for us to look up the exact reference. The lubricant type and working temperature are also useful.
- What does the R suffix mean in the CRSHA series?
- It points to a defined seal configuration, usually linked to the elastomer compound or the spring design. The manufacturer's technical documentation confirms the exact meaning, or you can ask us.
- Can I replace a seal from another brand with an SKF one?
- Yes, provided the main dimensions and operating conditions line up. Check the lip type and the material as well. If anything is unclear, send us the original code and we will help you find the right equivalent.