SKF 6014 M/C3S0 deep groove ball bearing
- Brand
- SKF
- Category
- Bearings
- Subcategory
- Deep groove ball bearings
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Decoding SKF 6014 M/C3S0
- 60Series
- Deep groove ball bearings, 60 series. Series differ in outside diameter and width even when the bore is the same.
- 14Bore
- Bore 70 mm (14 × 5).
- M/C3S0Suffix
- SKF suffix: identifies the variant, such as seals or shields, cage, internal clearance or other features.
6014 is the standard ISO basic designation, which sets the bearing type, series and bore.
Description
SKF 6014 M/C3S0 measures 70 mm across the bore and 110 mm across the outside diameter; its width is 20 mm (70 x 110 x 20 mm).
SKF 6014 M/C3S0 belongs to deep groove ball bearing, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 6014 M/C3S0 and any equivalents.
For equipment that needs smooth running under combined radial and axial loads, the SKF 60 series deep groove ball bearing is a standard choice. Its single-row design with deep raceways supports high speeds and dependable operation. MR Industrial Accessories supplies these bearings to maintenance and purchasing teams across the United States and Latin America.
Reading the bearing code helps you order the right variant. The base number, such as 6014, identifies the type and dimension series; the 60 series is a medium-section bearing with a moderate outside diameter. Suffixes then define execution: M means a machined brass cage, which suits high speeds and elevated temperatures; C3 or C4 indicate internal radial clearance above normal, useful with tight fits or when temperature differs between shaft and housing; S0 confirms standard heat treatment for normal operating temperatures. A 6014 M/C3S0 therefore combines a brass cage with C3 clearance.
These bearings appear in electric motors, centrifugal pumps, fans, gearboxes, machine tools, conveyors and process equipment. Because they accept radial and axial loads in both directions, they fit many drive arrangements. In food, chemical, textile and metallurgical plants, they are often found on belt or chain drives where a reliable, low-maintenance support is required.
Selection depends on load, speed and the surrounding environment. Where dust or moisture is present, consider sealed or shielded variants. Match internal clearance to the fit and operating temperature; C3 clearance commonly offsets thermal expansion. Lubrication may be grease or oil, and it must be compatible with the brass cage. During mounting, align the bearing correctly and avoid impacts that could damage the raceways. Follow the manufacturer's recommendations.
SKF deep groove ball bearings can be interchanged with other brands that share the same standardized dimensions. Suffix designations may differ between manufacturers, but the base number and dimension series usually correspond. When replacing a bearing, confirm the dimensions and the required clearance. Our team can help you identify a suitable equivalent without compromising equipment performance.
Send your bearing code by WhatsApp or email to request a quote. MR Industrial Accessories supplies SKF bearings and can assist with selection for your application.
More SKF versions in the 6014 series
SKF lists these 6014 series versions in its catalogs, but they don't have a page on this site. Send us the part number of any of them and we'll find it and quote it.
- SKF 6014 N
Dimensions
70 x 110 x 20 mm (d x D x B): boundary dimensions for basic designation 6014, according to ISO 15.
- Bore
- 70mm
- Outside diameter (D)
- 110mm
- Width (B)
- 20mm
Same size, other brands
Other brands' pages with basic designation 6014: 70 x 110 x 20 mm (d x D x B) per ISO 15.
What they share are the ISO 15 boundary dimensions, not the specs: seals or shields, internal clearance, cage and load rating may vary with brand and suffix. Every quote is by full part number.
Frequently asked questions
- SKF 6014 M/C3S0 bearing: what are its dimensions?
- SKF 6014 M/C3S0 measures 70 mm across the bore and 110 mm across the outside diameter; its width is 20 mm (70 x 110 x 20 mm). Those are the boundary dimensions standardized in ISO 15 for basic designation 6014.
- What does the C3 suffix mean on an SKF bearing?
- C3 indicates internal radial clearance greater than normal. It is chosen when fits are tight or thermal gradients exist, so the bearing does not become preloaded and fail early.
- What is the difference between an M cage and a steel cage?
- An M cage is machined brass, offering higher strength for high speeds and temperatures. A stamped steel cage is more economical and suits standard applications.
- How do I know if I need a bearing with C4 clearance?
- C4 clearance is greater than C3 and is used with very tight fits or significant thermal differences between inner and outer rings. Share your equipment data and we can help determine the most suitable option.