SKF 6008-2RS1 deep groove ball bearing
- Brand
- SKF
- Category
- Bearings
- Subcategory
- Deep groove ball bearings
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Decoding SKF 6008-2RS1
- 60Series
- Deep groove ball bearings, 60 series. Series differ in outside diameter and width even when the bore is the same.
- 08Bore
- Bore 40 mm (08 × 5).
- 2RS1Suffix
- SKF suffix: identifies the variant, such as seals or shields, cage, internal clearance or other features.
6008 is the standard ISO basic designation, which sets the bearing type, series and bore.
Description
SKF 6008-2RS1 measures 40 mm across the bore and 68 mm across the outside diameter; its width is 15 mm (40 x 68 x 15 mm).
SKF 6008-2RS1 belongs to deep groove ball bearing, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 6008-2RS1 and any equivalents.
SKF Series 60 deep groove ball bearings are single-row bearings built to handle radial and axial loads in industrial equipment. Their deep raceway grooves support smooth running at higher speeds. The RS1 and 2RS1 suffixes tell you whether sealing is on one side or on both, which affects how well the bearing keeps out contaminants and holds its lubricant. Typical installations include electric motors, pumps, fans and transmissions. MR Industrial Accessories supplies this brand to customers in the United States and Latin America.
Reading the code is the fastest way to confirm what you are ordering. The base number in the 60 series sets the size, and the suffix describes the sealing arrangement. A bearing marked 6006-2RS1 carries rubber seals on both sides, while 6006-RS1 has a seal on just one side. RS1 identifies a contact seal, so it blocks dust and moisture more effectively than a non-contact design. Before you order, decide whether the application calls for single or double sealing based on how exposed the bearing will be.
These bearings appear in general-purpose electric motors, centrifugal pumps, fans, compressors, conveyor belts and machine tools. Because they accept moderate radial and axial loads, they fit many positions. In food processing, where washdown and cleanliness matter, the RS1 seal helps keep liquids and particles out of the raceway. Power transmission equipment and agricultural machinery also use them regularly, and their dependable operation helps reduce unplanned downtime.
Selection comes down to load, speed and the environment around the bearing. Where dust or water is present, the 2RS1 version is the safer choice. Confirm that shaft and housing are properly aligned so the bearing does not pick up extra stress. Sealed bearings arrive pre-lubricated, so no further greasing is needed in service. During mounting, press evenly on the ring that is fixed and never transmit force through the balls. Clean mating surfaces and a correct fit both contribute to service life.
SKF deep groove ball bearings interchange with other recognized brands that share the same standardized dimensions. Suffix conventions differ between manufacturers: some use 2RS or DDU to indicate double sealing. Always verify the full code and the tolerances before substituting. MR Industrial Accessories can help you match a replacement without sacrificing performance, working from each manufacturer's standard designations.
If you already know the SKF code, send it by WhatsApp or email to MR Industrial Accessories and the team will reply promptly with a quote. If you do not have the reference, they can help identify the part. They can also suggest equivalents and assist with selection and mounting questions.
More SKF versions in the 6008 series
SKF lists these 6008 series versions in its catalogs, but they don't have a page on this site. Send us the part number of any of them and we'll find it and quote it.
- SKF 6008 N
Dimensions
40 x 68 x 15 mm (d x D x B): boundary dimensions for basic designation 6008, according to ISO 15.
- Bore
- 40mm
- Outside diameter (D)
- 68mm
- Width (B)
- 15mm
Same size, other brands
Other brands' pages with basic designation 6008: 40 x 68 x 15 mm (d x D x B) per ISO 15.
What they share are the ISO 15 boundary dimensions, not the specs: seals or shields, internal clearance, cage and load rating may vary with brand and suffix. Every quote is by full part number.
Frequently asked questions
- SKF 6008-2RS1 bearing: what are its dimensions?
- SKF 6008-2RS1 measures 40 mm across the bore and 68 mm across the outside diameter; its width is 15 mm (40 x 68 x 15 mm). Those are the boundary dimensions standardized in ISO 15 for basic designation 6008.
- What does the suffix 2RS1 mean on an SKF bearing?
- It means the bearing has rubber contact seals on both sides. This creates a barrier against dust, water and other contaminants while keeping the factory lubricant in place. It suits dirty or humid environments.
- What is the difference between RS1 and 2RS1?
- RS1 means a single rubber seal on one side. 2RS1 means seals on both sides. The double-sealed version gives more protection, though it may carry a slight reduction in limiting speed. Match the choice to the working conditions.
- How do I know which bearing I need for my application?
- You need the shaft and housing dimensions, the radial and axial loads, and the environmental conditions. With that information the team can recommend the right code. If you have the old bearing, send the reference and they will identify it.