SKF 6006-2RZ/C3WT deep groove ball bearing
- Brand
- SKF
- Category
- Bearings
- Subcategory
- Deep groove ball bearings
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Decoding SKF 6006-2RZ/C3WT
- 60Series
- Deep groove ball bearings, 60 series. Series differ in outside diameter and width even when the bore is the same.
- 06Bore
- Bore 30 mm (06 × 5).
- 2RZ/C3WTSuffix
- SKF suffix: identifies the variant, such as seals or shields, cage, internal clearance or other features.
6006 is the standard ISO basic designation, which sets the bearing type, series and bore.
Description
SKF 6006-2RZ/C3WT measures 30 mm across the bore and 55 mm across the outside diameter; its width is 13 mm (30 x 55 x 13 mm).
SKF 6006-2RZ/C3WT belongs to deep groove ball bearing, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 6006-2RZ/C3WT and any equivalents.
Part number 6006-2RZ/C3WT belongs to the SKF deep groove ball bearing range, a design built to take radial loads together with the axial loads that appear in rotating machinery. Its size and layout suit many kinds of industrial equipment, and the code itself tells you most of what you need before ordering. MR Industrial Accessories LLC supplies this brand to plants in the United States and Latin America.
Reading the designation is the fastest way to confirm a bearing fits the job. The base number 6006 sets the series and the size; 2RZ means low-friction seals sit on both sides; C3 signals radial internal clearance wider than standard; and WT identifies a particular factory fill of lubricant. Once those blocks are clear, matching a replacement to the original position becomes straightforward.
Because this bearing handles combined loads and runs at high speed, it turns up in electric motors, pumps, fans, conveyor belts and machine tools. Food processing, metallurgy, textile and automotive plants all rely on it, and it is a common sight in transmission equipment and roller lines. The sealed version is often chosen where dust or process debris is present.
Selection usually comes down to three points. The 2RZ seals keep lubricant inside and contaminants outside, which matters in dirty surroundings. C3 clearance helps where operating heat or an interference fit on shaft and housing would otherwise close up the internal gap. The WT lubricant is matched to defined temperature and speed conditions. At assembly, align the components carefully and avoid impacts that could mark the raceways.
Bearings of this type from other makers can replace one another when dimensions and tolerances agree, though designations for similar features differ between brands, so the technical data should always be checked. Send the exact part number and our team can review equivalents and help you decide. The right choice still depends on how the application runs.
For a quote, message the complete bearing part number to MR Industrial Accessories LLC on WhatsApp or by email. Our team answers promptly, offers guidance on equivalents and helps with selection.
More SKF versions in the 6006 series
SKF lists these 6006 series versions in its catalogs, but they don't have a page on this site. Send us the part number of any of them and we'll find it and quote it.
- SKF 6006 NR
Dimensions
30 x 55 x 13 mm (d x D x B): boundary dimensions for basic designation 6006, according to ISO 15.
- Bore
- 30mm
- Outside diameter (D)
- 55mm
- Width (B)
- 13mm
Same size, other brands
Other brands' pages with basic designation 6006: 30 x 55 x 13 mm (d x D x B) per ISO 15.
What they share are the ISO 15 boundary dimensions, not the specs: seals or shields, internal clearance, cage and load rating may vary with brand and suffix. Every quote is by full part number.
Frequently asked questions
- SKF 6006-2RZ/C3WT bearing: what are its dimensions?
- SKF 6006-2RZ/C3WT measures 30 mm across the bore and 55 mm across the outside diameter; its width is 13 mm (30 x 55 x 13 mm). Those are the boundary dimensions standardized in ISO 15 for basic designation 6006.
- What does 2RZ indicate on this SKF bearing?
- It means low-friction seals are fitted on both sides of the bearing. They hold the lubricant in place and limit the entry of contaminants, which helps in dusty or dirty service.
- When is C3 clearance the right choice?
- C3 suits situations where high operating temperatures or interference fits on the shaft and housing would reduce the internal gap. The extra clearance absorbs that expansion and keeps the rolling elements from being overloaded.
- How do I get a quote for SKF bearings from MR?
- Send the full part number through WhatsApp or email. The team replies promptly and can suggest equivalent options or help you confirm the selection.