SKF 6002-2RSLTN9/HC5C3WT deep groove ball bearing
- Brand
- SKF
- Category
- Bearings
- Subcategory
- Deep groove ball bearings
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Decoding SKF 6002-2RSLTN9/HC5C3WT
- 60Series
- Deep groove ball bearings, 60 series. Series differ in outside diameter and width even when the bore is the same.
- 02Bore
- Bore 15 mm: by standard, 02 designates 15 mm.
- 2RSLTN9/HC5C3WTSuffix
- SKF suffix: identifies the variant, such as seals or shields, cage, internal clearance or other features.
6002 is the standard ISO basic designation, which sets the bearing type, series and bore.
Description
SKF 6002-2RSLTN9/HC5C3WT measures 15 mm across the bore and 32 mm across the outside diameter; its width is 9 mm (15 x 32 x 9 mm).
SKF 6002-2RSLTN9/HC5C3WT belongs to deep groove ball bearing, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 6002-2RSLTN9/HC5C3WT and any equivalents.
For maintenance and purchasing teams, the SKF 60 and 62 series deep groove ball bearings with the 2RSLTN9 seal, HC5 ring, and C3 clearance offer a sealed, lifetime-lubricated solution for radial and axial loads in both directions. These bearings suit low-maintenance, high-reliability equipment such as electric motors, pumps, and fans. MR Industrial Accessories supplies this line as part of its SKF bearing catalog.
Reading the code helps you confirm the right variant. The base number, like 6000 or 6200, sets the size and series. The 2RSLTN9 suffix means low-friction contact seals on both sides, designed to cut drag torque. HC5 indicates rings and balls made from high-purity steel with a special treatment for longer service life. C3 denotes internal radial clearance above standard, which suits interference fits or thermal gradients. WT refers to a special long-life grease. The series spans from 6000-2RSLTN9/HC5C3WT through 6202-2RSLTN9/HC5C3WT, covering multiple sizes.
These bearings appear in automotive, food, metallurgical, and petrochemical plants. Common uses include low- and medium-power electric motors, centrifugal pumps, fans, compressors, machine tools, and transmission equipment. The seals let them run in dusty or moderately humid areas, while C3 clearance helps when shaft or housing fits reduce internal clearance. They are a practical choice where operational continuity matters.
Selection depends on the radial and axial load, rotational speed, and environment. The 2RSLTN9 seal keeps contaminants out and lubricant in, but in very aggressive conditions you may need extra sealing. Choose C3 when fits are tight or when temperature differences between shaft and housing are expected. During mounting, align precisely and avoid impacts that could harm seals or raceways. Lifetime lubrication usually removes the need for relubrication.
For interchangeability, other brands following the same dimensional and suffix designations—such as FAG, NSK, or NTN—can work if sealing, clearance, and material specs match. Always verify that the code agrees in dimensions and tolerances before replacing. For help choosing or cross-referencing, send the complete code to MR Industrial Accessories via WhatsApp or email; the team replies promptly and can suggest equivalents.
Dimensions
15 x 32 x 9 mm (d x D x B): boundary dimensions for basic designation 6002, according to ISO 15.
- Bore
- 15mm
- Outside diameter (D)
- 32mm
- Width (B)
- 9mm
Same size, other brands
Other brands' pages with basic designation 6002: 15 x 32 x 9 mm (d x D x B) per ISO 15.
What they share are the ISO 15 boundary dimensions, not the specs: seals or shields, internal clearance, cage and load rating may vary with brand and suffix. Every quote is by full part number.
Frequently asked questions
- SKF 6002-2RSLTN9/HC5C3WT bearing: what are its dimensions?
- SKF 6002-2RSLTN9/HC5C3WT measures 15 mm across the bore and 32 mm across the outside diameter; its width is 9 mm (15 x 32 x 9 mm). Those are the boundary dimensions standardized in ISO 15 for basic designation 6002.
- What does the 2RSLTN9 suffix mean in these bearings?
- It indicates low-friction contact seals on both sides, designed to reduce drag torque, block contaminants, and retain lubricant for life.
- When is it advisable to choose a bearing with C3 clearance?
- C3 clearance is suitable when assembly involves interference fits on the shaft or housing, or when thermal gradients can reduce internal clearance. It also helps in applications needing greater tolerance to slight misalignment.
- Can they be replaced by bearings from other brands?
- Yes, as long as the same dimensions, tolerances, and sealing and clearance specifications are respected. Brands such as FAG, NSK, or NTN offer equivalents, but it is essential to verify interchangeability before replacing.