SKF 6002-2RSH/C2LTVT190 deep groove ball bearing
- Brand
- SKF
- Category
- Bearings
- Subcategory
- Deep groove ball bearings
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Decoding SKF 6002-2RSH/C2LTVT190
- 60Series
- Deep groove ball bearings, 60 series. Series differ in outside diameter and width even when the bore is the same.
- 02Bore
- Bore 15 mm: by standard, 02 designates 15 mm.
- 2RSH/C2LTVT190Suffix
- SKF suffix: identifies the variant, such as seals or shields, cage, internal clearance or other features.
6002 is the standard ISO basic designation, which sets the bearing type, series and bore.
Description
SKF 6002-2RSH/C2LTVT190 measures 15 mm across the bore and 32 mm across the outside diameter; its width is 9 mm (15 x 32 x 9 mm).
SKF 6002-2RSH/C2LTVT190 belongs to deep groove ball bearing, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 6002-2RSH/C2LTVT190 and any equivalents.
This SKF deep groove ball bearing from the RSH/C series is a single-row unit with contact seals on both sides and LTVT grease. It handles moderate radial and axial loads in equipment where keeping grease in and contaminants out matters. It is a common pick for industrial applications that call for low maintenance and quiet running.
The code breaks down into useful information. RSH means a rubber contact seal on each side. The slash separates the C suffix, which covers the internal clearance or execution variant. LTVT identifies the grease. Take 6002-2RSH/C2LTVT190: 6002 is the size, and the suffixes describe sealing, clearance and lubricant. Reading the designation this way helps you order the exact bearing.
You will find this bearing in electric motors, centrifugal pumps, fans, conveyors and machine tools. It suits food, chemical and process plants where the seal limits grease loss and keeps out dust or moisture. It also fits low and medium power equipment running continuously. The sealed, rigid design works in areas with particles or frequent washdowns.
For selection, consider radial and axial load, rotation speed and operating temperature. Because RSH is a contact seal, it retains grease well but adds friction, so check that speed stays within the limit for contact seals. LTVT grease is pre-dosed at the factory and normally needs no relubrication. During mounting, align shaft and housing correctly and avoid striking the seals.
Other manufacturers may offer bearings with similar sealing, but suffixes differ by brand. Codes do not cross automatically: always verify main dimensions, seal type and clearance. To replace an SKF bearing with another make, send us the full code plus shaft and housing dimensions. We can help you find the right option.
If you have the bearing code, send it by WhatsApp or email. With the complete code we identify series, seal and lubricant, then quote. Without the code, send shaft and housing dimensions and describe the application. We will help you choose the correct bearing for your equipment.
Dimensions
15 x 32 x 9 mm (d x D x B): boundary dimensions for basic designation 6002, according to ISO 15.
- Bore
- 15mm
- Outside diameter (D)
- 32mm
- Width (B)
- 9mm
Same size, other brands
Other brands' pages with basic designation 6002: 15 x 32 x 9 mm (d x D x B) per ISO 15.
What they share are the ISO 15 boundary dimensions, not the specs: seals or shields, internal clearance, cage and load rating may vary with brand and suffix. Every quote is by full part number.
Frequently asked questions
- SKF 6002-2RSH/C2LTVT190 bearing: what are its dimensions?
- SKF 6002-2RSH/C2LTVT190 measures 15 mm across the bore and 32 mm across the outside diameter; its width is 9 mm (15 x 32 x 9 mm). Those are the boundary dimensions standardized in ISO 15 for basic designation 6002.
- What does the RSH suffix mean on an SKF bearing?
- RSH indicates rubber contact seals on both sides. This seal retains grease and blocks dust or water. Contact seals create more friction than non-contact types, so they can limit maximum operating speed.
- Does this bearing require relubrication?
- No. It comes from the factory with LTVT grease and seals on both sides. Under normal conditions it does not need relubrication. In very demanding or high-temperature environments, consult us about a maintenance plan.
- Can I replace an SKF bearing with another brand?
- Yes, but codes do not cross automatically between brands. Main dimensions may match, yet suffixes for seal, clearance and lubricant can differ. Verify shaft and housing dimensions, and send us the original code to confirm interchangeability.