SKF 369 S/2/362 A/2/Q tapered roller bearing

SKF 369 S/2/362 A/2/Q belongs to tapered roller bearing, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 369 S/2/362 A/2/Q and any equivalents.

SKF tapered roller bearings handle radial and axial forces at the same time. Each bearing consists of a cone (the inner ring assembly with rollers and cage) and a cup (the outer ring), and the two parts can be separated. This design suits wheel hubs, gearboxes, spindles and other equipment where loads come from two directions. In most installations they work in pairs, either face-to-face or matched, so that the right preload and clearance are set.

The part number joins a cone series and a cup series with a slash. In 369 S/2/362 A/2/Q, the cone is 369 S/2 and the cup is 362 A/2; order the complete designation. The series points to the general dimensions and load capacity, while the bore number is tied to the shaft diameter. For a replacement, always start from the full code on the bearing or in the machine manual.

These bearings appear in wheel hubs of commercial and agricultural vehicles, transmission gearboxes, speed reducers, machine tool spindles and material handling equipment. Pumps, fans and conveyors that see radial and axial loads together also use them. MR Industrial Accessories supplies SKF bearings for workshops, plants and machinery builders across the United States, Canada, Mexico and South America.

Selection depends on the radial and axial load, the rotational speed and the operating environment. Mounting calls for an interference fit on the cone and controlled clearance on the cup, with both rings precisely aligned. Use a lubricant that matches the working conditions and keep the assembly area clean to avoid early failures. If the equipment runs with vibration or impact, check clearance and preload as the manufacturer instructs.

When replacing a bearing, you may come across equivalent codes from other brands with the same dimensions and load capacity. Interchangeability depends on the cone and cup dimensions, not just the series number. If you have the original code or the old part, compare diameters and width to confirm compatibility. MR Industrial Accessories quotes the exact code or dimension you provide.

For a tapered roller bearing, send the code or dimensions through WhatsApp or email. We reply promptly and can suggest a compatible alternative if you only have a code from another brand or an unidentified part.