SKF 33208/QCL7C tapered roller bearing
- Brand
- SKF
- Category
- Bearings
- Subcategory
- Tapered roller bearings
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Decoding SKF 33208/QCL7C
- 332Series
- Tapered roller bearings, 332 series. Series differ in outside diameter and width even when the bore is the same.
- 08Bore
- Bore 40 mm (08 × 5).
- QCL7CSuffix
- SKF suffix: identifies the variant, such as seals or shields, cage, internal clearance or other features.
33208 is the standard ISO basic designation, which sets the bearing type, series and bore.
Description
SKF 33208/QCL7C measures 40 mm across the bore and 80 mm across the outside diameter; its total width is 32 mm (40 x 80 x 32 mm).
SKF 33208/QCL7C belongs to tapered roller bearing, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 33208/QCL7C and any equivalents.
SKF tapered roller bearings are built with tapered raceways and rollers that make linear contact, so they can take radial and axial loads in both directions. You will find them in gearboxes, wheel hubs and other industrial machinery where the load is combined. MR Industrial Accessories LLC supplies the SKF brand and helps you match the right part number to your equipment.
The designation for this series pairs a cone number with a cup number, separated by a slash, and may carry suffixes. Take 2788/2720/QCL7C: 2788 is the cone, 2720 is the cup, and QCL7C is the suffix. That suffix typically points to a surface treatment or a special tolerance. Reading the code correctly is the first step to ordering the exact replacement and avoiding mix-ups.
Typical sectors include food processing, cement, mining and automotive. Conveyors, mills, pumps, earthmoving machines, heavy-vehicle wheel hubs and machine tools all rely on this bearing type. Its ability to carry combined loads makes it a practical choice in tough operating conditions.
When selecting a bearing, check the radial and axial loads, the rotation speed and the environment. Mounting calls for precise alignment and the right axial clearance, adjusted with lock nuts or shims. Lubrication matters too: grease or oil depending on the application, with sealing to keep contamination out. Careful mounting helps extend service life.
Interchangeability between brands exists, but it is not universal. Each manufacturer uses its own part numbers and tolerances, so when you look for a replacement, compare dimensions and load capacities rather than the number alone. MR Industrial Accessories LLC can help you find the right interchange for your equipment.
If you need an SKF tapered roller bearing, send the complete part number on WhatsApp. Our technical team replies with the quote and can suggest equivalents or help you choose.
Dimensions
40 x 80 x 32 mm (d x D x T): boundary dimensions for basic designation 33208, according to ISO 355.
- Bore
- 40mm
- Outside diameter (D)
- 80mm
- Total width (T)
- 32mm
Same size, other brands
Other brands' pages with basic designation 33208: 40 x 80 x 32 mm (d x D x T) per ISO 355.
What they share are the ISO 355 boundary dimensions, not the specs: seals or shields, internal clearance, cage and load rating may vary with brand and suffix. Every quote is by full part number.
Frequently asked questions
- SKF 33208/QCL7C bearing: what are its dimensions?
- SKF 33208/QCL7C measures 40 mm across the bore and 80 mm across the outside diameter; its total width is 32 mm (40 x 80 x 32 mm). Those are the boundary dimensions standardized in ISO 355 for basic designation 33208.
- How do I identify the tapered roller bearing I need?
- Check the part number engraved on the bearing or listed in the equipment manual. It usually includes cone and cup numbers plus suffixes. If you cannot find it, measure the inner diameter, outer diameter and width, and send those figures to us on WhatsApp.
- What does the suffix QCL7C mean in the designation?
- The suffix QCL7C refers to a specific tolerance or surface treatment defined by SKF. It does not change the main dimensions, but it can affect performance. Ask us if you need technical details.
- Do SKF bearings have equivalences with other brands?
- Yes, dimensional equivalences exist between brands, but part numbers and tolerances can differ. Always verify dimensions and load capacities before replacing. At MR we can guide you to the best option.