SKF 32313 B/U4CL7CVQ267 tapered roller bearing
- Brand
- SKF
- Category
- Bearings
- Subcategory
- Tapered roller bearings
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Decoding SKF 32313 B/U4CL7CVQ267
- 323Series
- Tapered roller bearings, 323 series. Series differ in outside diameter and width even when the bore is the same.
- 13Bore
- Bore 65 mm (13 × 5).
- B/U4CL7CVQ267Suffix
- SKF suffix: identifies the variant, such as seals or shields, cage, internal clearance or other features.
32313 is the standard ISO basic designation, which sets the bearing type, series and bore.
Description
SKF 32313 B/U4CL7CVQ267 measures 65 mm across the bore and 140 mm across the outside diameter; its total width is 51 mm (65 x 140 x 51 mm).
SKF 32313 B/U4CL7CVQ267 belongs to tapered roller bearing, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 32313 B/U4CL7CVQ267 and any equivalents.
SKF tapered roller bearings are built for radial and axial loads acting in both directions. The tapered design creates linear contact, which spreads the load across the rolling surfaces. This makes them a practical choice for gearboxes, reducers and other industrial drives. MR Industrial Accessories supplies this line to support your assembly work.
A bearing code carries a lot of information once you know how to read it. Take 32313 B/U4CL7CVQ267: the digits at the front set the dimension series; B points to a modified contact angle; U4 denotes a special tolerance; CL7 gives the internal clearance; CVQ267 covers the lubricant and heat treatment. Each element matters when you are matching a replacement or setting up an assembly.
You will find these bearings in food processing, cement, mining and metallurgy operations, as well as in conveyors, mills, presses and machine tools. In speed reducers, transmission shafts and support rollers they are a common sight. Their ability to take combined loads suits them to environments where moderate vibration and shock are present.
Selection comes down to the radial and axial loads, the running speed and the conditions around the bearing. Where dust or moisture is a factor, sealed variants are the sensible route. Internal clearance needs to match the application; too much clearance leads to noise and early wear. Correct lubrication and careful alignment at installation help the bearing reach its expected service life.
Equivalent bearings exist across manufacturers, but suffix codes are not always interchangeable. When replacing a bearing, check the main dimensions and the functional characteristics such as clearance, tolerance and lubricant rather than trusting the code alone. We can help you decode designations and identify a suitable alternative for your equipment.
To request SKF tapered roller bearings, send the complete code by WhatsApp. Our team will review it and provide a quote.
More SKF versions in the 32313 series
SKF lists these 32313 series versions in its catalogs, but they don't have a page on this site. Send us the part number of any of them and we'll find it and quote it.
- SKF 32313 BJ2/QU4CL7CVQ267
- SKF 32313 J2/Q
Dimensions
65 x 140 x 51 mm (d x D x T): boundary dimensions for basic designation 32313, according to ISO 355.
- Bore
- 65mm
- Outside diameter (D)
- 140mm
- Total width (T)
- 51mm
Same size, other brands
Other brands' pages with basic designation 32313: 65 x 140 x 51 mm (d x D x T) per ISO 355.
What they share are the ISO 355 boundary dimensions, not the specs: seals or shields, internal clearance, cage and load rating may vary with brand and suffix. Every quote is by full part number.
Frequently asked questions
- SKF 32313 B/U4CL7CVQ267 bearing: what are its dimensions?
- SKF 32313 B/U4CL7CVQ267 measures 65 mm across the bore and 140 mm across the outside diameter; its total width is 51 mm (65 x 140 x 51 mm). Those are the boundary dimensions standardized in ISO 355 for basic designation 32313.
- What do the suffixes in a tapered roller bearing designation mean?
- They describe features such as contact angle, dimensional tolerance, internal clearance and lubricant type. In 32313 B/U4CL7CVQ267, B indicates a modified design, U4 a special tolerance, CL7 the clearance and CVQ267 the lubricant. Codes vary by manufacturer.
- How do I choose between a tapered roller bearing and a ball bearing?
- Tapered roller bearings carry higher combined loads and are more rigid, which suits heavy-duty applications. Ball bearings work better for moderate radial loads and high speeds. Base the decision on load magnitude and operating conditions.
- What should I take into account when mounting a tapered roller bearing?
- Check shaft alignment, set the internal clearance to specification and apply the correct lubricant. Poor mounting can cause overheating and premature failure. Use suitable tools and follow the manufacturer's recommendations.