SKF 3212 A-2RS1/C3GEM6 double row angular contact ball bearing
- Brand
- SKF
- Category
- Bearings
- Subcategory
- Double row angular contact ball bearings
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Decoding SKF 3212 A-2RS1/C3GEM6
- 32Series
- Double row angular contact ball bearings, 32 series. Series differ in outside diameter and width even when the bore is the same.
- 12Bore
- Bore 60 mm (12 × 5).
- A-2RS1/C3GEM6Suffix
- SKF suffix: identifies the variant, such as seals or shields, cage, internal clearance or other features.
3212 is the standard ISO basic designation, which sets the bearing type, series and bore.
Description
SKF 3212 A-2RS1/C3GEM6 measures 60 mm across the bore and 110 mm across the outside diameter; its width is 36.5 mm (60 x 110 x 36.5 mm).
SKF 3212 A-2RS1/C3GEM6 belongs to double row angular contact ball bearing, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 3212 A-2RS1/C3GEM6 and any equivalents.
The SKF 3212 A-2RS1/C3GEM6 is a double row angular contact ball bearing built to carry combined radial and axial loads in both directions. Two rows of balls running on inclined raceways let it absorb tilting moments and heavier axial forces, which suits assemblies that need rigidity and rotational accuracy. It is a common choice for machine tool spindles, pumps, compressors and gearboxes.
Reading the code tells you what you are ordering. The 32 prefix identifies a double row angular contact ball bearing, and 12 is the size, which here means a 60 mm bore. The A suffix marks an internal design variant. 2RS1 means rubber seals on both sides, keeping contamination out and lubricant in. C3 is an internal radial clearance above normal, used where temperatures run high or the fit is an interference fit. GEM6 covers special lubrication or treatment characteristics under the SKF designation.
These bearings show up wherever combined loads and precision matter: machine tool main spindles, process pumps, screw compressors, speed reducers, power transmission equipment, automotive wheel applications, and agricultural and industrial machinery. Because they take axial loads in both directions plus moments, they fit assemblies that call for rigidity and accurate rotation.
Selection comes down to load size and direction, rotation speed, environment and lubrication. Go with 2RS1 sealing in dirty or humid conditions; open or shielded versions suit clean, high-speed duty. C3 clearance helps with interference fits and thermal gradients. At mounting, line up shaft and housing precisely and set preload or axial clearance to specification, then use a lubricant matched to operating temperature and speed. Poor mounting shortens bearing life.
Interchange is possible with other brands that follow the same dimensional and suffix system, but internal details such as clearance or seal type can vary between makers. Check that the technical characteristics match the original before substituting. Our team can review the code with you and suggest an equivalent that fits your application.
Dimensions
60 x 110 x 36.5 mm (d x D x B): boundary dimensions for basic designation 3212, according to ISO 15.
- Bore
- 60mm
- Outside diameter (D)
- 110mm
- Width (B)
- 36.5mm
Frequently asked questions
- SKF 3212 A-2RS1/C3GEM6 bearing: what are its dimensions?
- SKF 3212 A-2RS1/C3GEM6 measures 60 mm across the bore and 110 mm across the outside diameter; its width is 36.5 mm (60 x 110 x 36.5 mm). Those are the boundary dimensions standardized in ISO 15 for basic designation 3212.
- What does the 2RS1 suffix mean on an SKF bearing?
- It indicates rubber seals on both sides. The seals block contaminants and hold lubricant in place, which helps in dirty or humid environments.
- When is a C3 clearance bearing the right choice?
- C3 suits interference fits on shaft or housing, elevated operating temperatures that reduce internal clearance, and applications needing more tolerance to misalignment.
- How do I check if another brand's bearing is equivalent?
- Compare bore, outer diameter and width along with the suffixes for sealing and clearance. The basic designation may match while internal variants differ, so send us the code and we will help verify.