SKF 32044 X/DFC720 tapered roller bearing
- Brand
- SKF
- Category
- Bearings
- Subcategory
- Tapered roller bearings
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Decoding SKF 32044 X/DFC720
- 320Series
- Tapered roller bearings, 320 series. Series differ in outside diameter and width even when the bore is the same.
- 44Bore
- Bore 220 mm (44 × 5).
- X/DFC720Suffix
- SKF suffix: identifies the variant, such as seals or shields, cage, internal clearance or other features.
32044 is the standard ISO basic designation, which sets the bearing type, series and bore.
Description
SKF 32044 X/DFC720 belongs to tapered roller bearing, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 32044 X/DFC720 and any equivalents.
For equipment that carries both radial and axial forces at once, SKF two-row tapered roller bearings offer a solid solution. These bearings are arranged in pairs and suit gearboxes, wheel axles and mining machinery where high capacity and stiffness are needed. MR Industrial Accessories LLC supplies this line to customers across the United States and Latin America.
The part number tells you a lot if you know how to read it. Take 32044 X/DFC720: the first digits give the size and dimension series. The X means the boundary dimensions follow an international standard. DFC describes a face-to-face matched pair with controlled axial clearance, and the cones and cups are arranged in a specific way. The trailing 720 sets the axial clearance or preload value. Always check the manufacturer's product table to interpret each code correctly.
You will find these bearings in mining, cement, steel and food processing plants. They show up in mill gearboxes, crushers, conveyor systems, cranes and road equipment, as well as machine tool spindles and rolling mill rolls. Their construction handles heavy loads and moderate misalignment, which makes them a fit for dusty, vibrating and shock-loaded environments.
Selection depends on radial and axial load, speed and operating conditions. Proper mounting calls for accurate housing alignment and the right lubricant, grease or oil. Sealing matters to keep lubricant in and contaminants out. Follow the axial clearance or preload specified by the suffix. Poor installation can shorten bearing life.
Interchange between brands is possible when the main dimensions and suffix design match. However, nomenclature for matching and clearance differs from one maker to another. Verify the complete part number and check with a specialist before swapping in a different brand.
To request a quote or confirm an equivalent, send the full part number by WhatsApp or email. The team at MR Industrial Accessories LLC responds promptly and can suggest alternatives and help you choose the right bearing for your application.
Dimensions
- Bore
- 220mm
Frequently asked questions
- What does the suffix X/DFC mean in the designation?
- The X indicates that the main dimensions were modified to comply with an international standard. DFC identifies a face-to-face matched pair of bearings with controlled axial clearance. The number that follows, such as 720, specifies the clearance or preload value. Respect this configuration during mounting.
- Can they be mounted in any position?
- No. As a matched set, the cones and cups are arranged at the factory. Mount them according to the manufacturer's orientation marks to maintain the correct axial clearance and avoid premature failure.
- How do I know if I can replace a bearing from another brand with this SKF one?
- Compare the main dimensions, the type of matching and the axial clearance. Even if the measurements match, nomenclature can vary between manufacturers. Send us the original part number and we will help you verify the equivalence.