SKF 32016 X/QDFC165 tapered roller bearing
- Brand
- SKF
- Category
- Bearings
- Subcategory
- Tapered roller bearings
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Decoding SKF 32016 X/QDFC165
- 320Series
- Tapered roller bearings, 320 series. Series differ in outside diameter and width even when the bore is the same.
- 16Bore
- Bore 80 mm (16 × 5).
- X/QDFC165Suffix
- SKF suffix: identifies the variant, such as seals or shields, cage, internal clearance or other features.
32016 is the standard ISO basic designation, which sets the bearing type, series and bore.
Description
SKF 32016 X/QDFC165 measures 80 mm across the bore and 125 mm across the outside diameter; its total width is 29 mm (80 x 125 x 29 mm).
SKF 32016 X/QDFC165 belongs to tapered roller bearing, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 32016 X/QDFC165 and any equivalents.
Tapered roller bearings from SKF handle both radial and axial forces because their rollers sit at an angle between the raceways. This makes them a standard choice for shafts that need accurate guiding while transmitting heavy loads, such as those in gearboxes, reducers, wheel hubs and transmission equipment.
The part number 32016 X/QDFC165 follows a common structure. The digits 32016 indicate the series and size, while X/QDFC165 defines the specific execution. When you need a replacement, send the full code exactly as it appears on the drawing or the component, and the team will quote it promptly.
These bearings are used across many industries in gearboxes, vehicle axles and wheel hubs, road machinery, material handling equipment, presses and production lines. They also appear in process pumps, industrial fans and gear transmission systems where combined loads require a robust rolling solution.
Proper selection depends on the radial and axial load the shaft will carry, the rotation speed and the mounting type. Shaft and housing alignment is critical to prevent parasitic forces. Choose lubrication based on the working environment, and seal the assembly to keep lubricant in and contaminants out. During mounting, respect the recommended fits and housing tolerances.
If you are cross-referencing, codes from other manufacturers often match the same series and size. Send us another brand's code or an unidentified part, and we will point you to a compatible alternative. We supply leading brands so you can find the right solution.
To request this bearing or any other SKF reference, contact us on WhatsApp or by email with the code or model you need. The team replies promptly and can suggest equivalents or help you choose the correct part for your application.
Dimensions
80 x 125 x 29 mm (d x D x T): boundary dimensions for basic designation 32016, according to ISO 355.
- Bore
- 80mm
- Outside diameter (D)
- 125mm
- Total width (T)
- 29mm
Same size, other brands
Other brands' pages with basic designation 32016: 80 x 125 x 29 mm (d x D x T) per ISO 355.
- FAG32016-X-XL
- NTN32016XU32016XU3CC
- RKB32016
- TIMKEN32016X
What they share are the ISO 355 boundary dimensions, not the specs: seals or shields, internal clearance, cage and load rating may vary with brand and suffix. Every quote is by full part number.
Frequently asked questions
- SKF 32016 X/QDFC165 bearing: what are its dimensions?
- SKF 32016 X/QDFC165 measures 80 mm across the bore and 125 mm across the outside diameter; its total width is 29 mm (80 x 125 x 29 mm). Those are the boundary dimensions standardized in ISO 355 for basic designation 32016.
- What type of loads does a tapered roller bearing support?
- It supports combined radial and axial loads because the rollers are arranged at an angle. This makes it common in transmission shafts and gearboxes where forces are not purely radial.
- How do I request a quote for an SKF bearing?
- Send the complete code, for example 32016 X/QDFC165, or provide the dimensions and application details via WhatsApp or email. We will reply promptly with a quote and the best option for your equipment.
- What should I consider during mounting?
- Check alignment between shaft and housing, the mounting fits and proper lubrication. Careful mounting avoids unnecessary forces and helps extend bearing service life.