SKF 31314/CL7ADF tapered roller bearing
- Brand
- SKF
- Category
- Bearings
- Subcategory
- Tapered roller bearings
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Decoding SKF 31314/CL7ADF
- 313Series
- Tapered roller bearings, 313 series. Series differ in outside diameter and width even when the bore is the same.
- 14Bore
- Bore 70 mm (14 × 5).
- CL7ADFSuffix
- SKF suffix: identifies the variant, such as seals or shields, cage, internal clearance or other features.
31314 is the standard ISO basic designation, which sets the bearing type, series and bore.
Description
SKF 31314/CL7ADF belongs to tapered roller bearing, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 31314/CL7ADF and any equivalents.
SKF tapered roller bearings are built to carry radial and axial loads at the same time. The cone and cup design allows you to set mounting clearance, which suits equipment that needs rigidity and load capacity. MR Industrial Accessories supplies this line to maintenance and purchasing teams across the United States and Latin America, and can help you match the right part number to your machine.
The part number tells you a lot once you know how to read it. Take 31314/CL7ADF: the leading digits set the size under ISO, the slash separates cup and cone when the bearing comes as a matched assembly, and suffixes such as CL7 and ADF point to internal design details, contact angle and surface treatment. Confirm each suffix against the manufacturer's data sheet before you order.
You will find these bearings in automotive, metallurgy, cement and mining operations. They show up in reduction gearboxes, transmission shafts, heavy vehicle wheels and agricultural machinery. The combination of radial and axial capacity makes them a fit for high-stress, moderate-speed positions, both for replacements and for new builds.
Selection comes down to radial load, axial load, speed and the environment around the bearing. During installation, alignment and axial adjustment need to be precise; too much or too little clearance will cut service life. Follow the manufacturer's lubrication spec, keep seals in good condition to block contaminants, and on critical fits check interference and tightening torque.
SKF tapered roller bearings can interchange with other brands that share the same dimensions and capacity standards, but tolerances, angles and treatments may differ. Have a specialist verify any equivalent before you swap a component. MR Industrial Accessories can review interchangeability with you so the equipment keeps running as intended.
To request a quote, send the complete part number by WhatsApp or email. The team replies promptly and can suggest equivalents or help you choose the right bearing for your application.
More SKF versions in the 31314 series
SKF lists these 31314 series versions in its catalogs, but they don't have a page on this site. Send us the part number of any of them and we'll find it and quote it.
- SKF 31314 J2/QCL7C
- SKF 31314 J2/QCL7CDF
Dimensions
- Bore
- 70mm
Frequently asked questions
- What does the suffix CL7ADF mean on an SKF bearing?
- Suffixes cover design details such as contact angle, heat treatment or internal clearance. CL7ADF is one specific combination that defines technical attributes of the bearing. Check the manufacturer's documentation or contact us to interpret it correctly.
- How do I choose between a tapered roller bearing and a ball bearing?
- Tapered rollers handle higher combined loads and give more rigidity, but they are more sensitive to misalignment. Ball bearings work better for lower loads and higher speeds. The decision depends on your application, loads and operating conditions.
- Can I replace an SKF bearing with another brand?
- Yes, if the other brand meets the same dimensions and load capacity. Tolerances or materials may differ and affect performance, so verify the equivalent with a specialist before making the change.