SKF 305806 C-2Z tapered roller bearing
- Brand
- SKF
- Category
- Bearings
- Subcategory
- Tapered roller bearings
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
SKF 305806 C-2Z belongs to tapered roller bearing, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 305806 C-2Z and any equivalents.
SKF tapered roller bearings handle radial and axial loads at the same time. Their rollers and raceways are set at an angle, which lets them carry combined forces in demanding equipment such as gearboxes, wheel hubs and spindles. MR Industrial Accessories supplies the SKF brand so you can match the right bearing to your application.
Reading the designation helps you order the exact replacement. Take 305701 C-2Z: the numeric part points to the series and size, while C-2Z covers the internal design and the two protective shields. The same pattern continues across 305702 C-2Z through 305707 C-2Z and 305800 C-2Z, so a small change in the code means a different bearing in the same family.
These bearings appear in automotive, metalworking and agricultural machinery. Typical locations include transmission gearboxes, reducers, vehicle wheel hubs and earthmoving equipment. Because they support combined loads, they suit arrangements where radial and axial forces act together, such as helical gears or transmission shafts.
Selection depends on the size and direction of the loads, the rotation speed and the surrounding conditions. The 2Z shields keep out dust and dirt but do not seal against liquids, so consider other variants if water or oil is present. Mounting calls for precise alignment and correct adjustment of axial clearance, since these bearings are often installed in pairs. Use the lubricant specified by the manufacturer.
Interchange requires care. Every maker uses its own nomenclature, and an SKF tapered roller bearing can be replaced by another brand only when dimensions and load capacity match. Always check suffixes and tolerances before substituting, and confirm the technical data to avoid premature failure.
To request a quote, send the complete code by WhatsApp or email. The team at MR Industrial Accessories replies promptly, can suggest equivalents and helps you choose the right bearing for your equipment.
Dimensions
Dimensions and tolerances: Message us the part number on WhatsApp and we'll verify its dimensions and version with the manufacturer's datasheet.
Frequently asked questions
- What does the C-2Z suffix mean on an SKF bearing?
- C-2Z indicates a specific internal design plus sealing with two protective shields (2Z). It blocks dust and particles but not liquids, so check whether your application needs more sealing.
- How do I choose the right tapered roller bearing?
- Look at radial and axial loads, speed, temperature and environment. Mounting in pairs and setting axial clearance are critical. Send us your equipment data for a precise selection.
- Can I replace an SKF bearing with another brand?
- Yes, if dimensions, load capacity and tolerances match. Each manufacturer uses its own nomenclature, so verify the technical specifications. We can help you find the correct replacement.